PythonQt.QtCore.QMetaMethod · declarations 001
Back to PythonQt.QtCore.QMetaMethod
Access
instance-attribute
Access: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
Attributes
instance-attribute
Attributes: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
Cloned
instance-attribute
Cloned: Any
Compatibility
instance-attribute
Compatibility: Any
Constructor
instance-attribute
Constructor: Any
Method
instance-attribute
Method: Any
MethodType
instance-attribute
MethodType: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
Private
instance-attribute
Private: Any
Protected
instance-attribute
Protected: Any
Public
instance-attribute
Public: Any
Scriptable
instance-attribute
Scriptable: Any
Signal
instance-attribute
Signal: Any
Slot
instance-attribute
Slot: Any
access
access() -> Any
X.access()
Supplemental documentation: Qt 5 reference:
QMetaMethod::Access QMetaMethod::access() const
Returns the access specification of this method (private, protected, or public).
Note: Signals are always public, but you should regard that as an implementation detail. It is almost always a bad idea to emit a signal from outside its class.
See also methodType().
Upstream PySide2 reference signatures (binding differences may apply):
access(self) -> PySide2.QtCore.QMetaMethod.Access
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#access
attributes
attributes() -> int
X.attributes() -> int
enclosingMetaObject
enclosingMetaObject() -> Any
X.enclosingMetaObject() -> PythonQt.QtCore.QMetaObject
Upstream PySide2 reference signatures (binding differences may apply):
enclosingMetaObject(self) -> PySide2.QtCore.QMetaObject
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#enclosingMetaObject
getParameterTypes
getParameterTypes(types: Any) -> Any
X.getParameterTypes(types)
isValid
isValid() -> bool
X.isValid() -> bool
Supplemental documentation: Qt 5 reference:
bool QMetaMethod::isValid() const
Returns true if this method is valid (can be introspected and invoked), otherwise
returns false.
This function was introduced in Qt 5.0.
Upstream PySide2 reference signatures (binding differences may apply):
isValid(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#isValid
methodIndex
methodIndex() -> int
X.methodIndex() -> int
Supplemental documentation: Qt 5 reference:
int QMetaMethod::methodIndex() const
Returns this method's index.
This function was introduced in Qt 4.6.
Upstream PySide2 reference signatures (binding differences may apply):
methodIndex(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#methodIndex
methodSignature
methodSignature() -> Any
X.methodSignature() -> PythonQt.QtCore.QByteArray
Supplemental documentation: Qt 5 reference:
QByteArray QMetaMethod::methodSignature() const
Returns the signature of this method (e.g., setValue(double)).
This function was introduced in Qt 5.0.
See also parameterTypes() and parameterNames().
Upstream PySide2 reference signatures (binding differences may apply):
methodSignature(self) -> PySide2.QtCore.QByteArray
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#methodSignature
methodType
methodType() -> Any
X.methodType()
Supplemental documentation: Qt 5 reference:
QMetaMethod::MethodType QMetaMethod::methodType() const
Returns the type of this method (signal, slot, or method).
See also access().
Upstream PySide2 reference signatures (binding differences may apply):
methodType(self) -> PySide2.QtCore.QMetaMethod.MethodType
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#methodType
name
name() -> Any
X.name() -> PythonQt.QtCore.QByteArray
Supplemental documentation: Qt 5 reference:
QByteArray QMetaMethod::name() const
Returns the name of this method.
This function was introduced in Qt 5.0.
See also methodSignature() and parameterCount().
Upstream PySide2 reference signatures (binding differences may apply):
name(self) -> PySide2.QtCore.QByteArray
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#name
parameterCount
parameterCount() -> int
X.parameterCount() -> int
Supplemental documentation: Qt 5 reference:
int QMetaMethod::parameterCount() const
Returns the number of parameters of this method.
This function was introduced in Qt 5.0.
See also parameterType() and parameterNames().
Upstream PySide2 reference signatures (binding differences may apply):
parameterCount(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#parameterCount
parameterNames
parameterNames() -> Any
X.parameterNames()
Supplemental documentation: Qt 5 reference:
QList\<QByteArray> QMetaMethod::parameterNames() const
Returns a list of parameter names.
See also parameterTypes() and methodSignature().
Upstream PySide2 reference signatures (binding differences may apply):
parameterNames(self) -> typing.List[PySide2.QtCore.QByteArray]
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#parameterNames
parameterType
parameterType(index: int) -> int
X.parameterType(index) -> int
Supplemental documentation: Qt 5 reference:
int QMetaMethod::parameterType(int index) const
Returns the type of the parameter at the given index.
The return value is one of the types that are registered with QMetaType, or QMetaType::UnknownType if the type is not registered.
This function was introduced in Qt 5.0.
See also parameterCount(), returnType(), and QMetaType.
Upstream PySide2 reference signatures (binding differences may apply):
parameterType(self, index: int) -> int
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#parameterType
parameterTypes
parameterTypes() -> Any
X.parameterTypes()
Supplemental documentation: Qt 5 reference:
QList\<QByteArray> QMetaMethod::parameterTypes() const
Returns a list of parameter types.
See also parameterNames() and methodSignature().
Upstream PySide2 reference signatures (binding differences may apply):
parameterTypes(self) -> typing.List[PySide2.QtCore.QByteArray]
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#parameterTypes
returnType
returnType() -> int
X.returnType() -> int
Supplemental documentation: Qt 5 reference:
int QMetaMethod::returnType() const
Returns the return type of this method.
The return value is one of the types that are registered with QMetaType, or QMetaType::UnknownType if the type is not registered.
This function was introduced in Qt 5.0.
See also parameterType(), QMetaType, and typeName().
Upstream PySide2 reference signatures (binding differences may apply):
returnType(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#returnType
revision
revision() -> int
X.revision() -> int
Supplemental documentation: Qt 5 reference:
int QMetaMethod::revision() const
Returns the method revision if one was specified by Q_REVISION, otherwise returns 0.
This function was introduced in Qt 5.1.
Upstream PySide2 reference signatures (binding differences may apply):
revision(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#revision
tag
tag() -> str
X.tag() -> int
Supplemental documentation: Qt 5 reference:
const char *QMetaMethod::tag() const
Returns the tag associated with this method.
Tags are special macros recognized by moc that make it possible to add extra
information about a method.
Tag information can be added in the following way in the function declaration:
// In the class MainWindow declaration
#ifndef Q_MOC_RUN
// define the tag text as empty, so the compiler doesn't see it
# define MY_CUSTOM_TAG
#endif
...
private slots:
MY_CUSTOM_TAG void testFunc();
and the information can be accessed by using:
MainWindow win;
win.show();
int functionIndex = win.metaObject()->indexOfSlot("testFunc()");
QMetaMethod mm = win.metaObject()->method(functionIndex);
qDebug() << mm.tag(); // prints MY_CUSTOM_TAG
For the moment, moc will extract and record all tags, but it will not handle any of
them specially. You can use the tags to annotate your methods differently, and treat
them according to the specific needs of your application.
Note: Since Qt 5.0, moc expands preprocessor macros, so it is necessary to
surround the definition with #ifndef Q_MOC_RUN, as shown in the example above. This
was not required in Qt 4. The code as shown above works with Qt 4 too.
Upstream PySide2 reference signatures (binding differences may apply):
tag(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#tag
typeName
typeName() -> str
X.typeName() -> int
Supplemental documentation: Qt 5 reference:
const char *QMetaMethod::typeName() const
Returns the return type name of this method.
See also returnType() and QMetaType::type().
Upstream PySide2 reference signatures (binding differences may apply):
typeName(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qmetamethod.html#typeName