PythonQt.QtCore.QTextStream · declarations 001
Back to PythonQt.QtCore.QTextStream
AlignAccountingStyle
instance-attribute
AlignAccountingStyle: Any
AlignCenter
instance-attribute
AlignCenter: Any
AlignLeft
instance-attribute
AlignLeft: Any
AlignRight
instance-attribute
AlignRight: Any
FieldAlignment
instance-attribute
FieldAlignment: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
FixedNotation
instance-attribute
FixedNotation: Any
ForcePoint
instance-attribute
ForcePoint: Any
ForceSign
instance-attribute
ForceSign: Any
NumberFlag
instance-attribute
NumberFlag: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
NumberFlags
instance-attribute
NumberFlags: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
RealNumberNotation
instance-attribute
RealNumberNotation: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
ScientificNotation
instance-attribute
ScientificNotation: Any
ShowBase
instance-attribute
ShowBase: Any
SmartNotation
instance-attribute
SmartNotation: Any
UppercaseBase
instance-attribute
UppercaseBase: Any
UppercaseDigits
instance-attribute
UppercaseDigits: Any
atEnd
atEnd() -> bool
X.atEnd() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextStream::atEnd() const
Returns true if there is no more data to be read from the
QTextStream; otherwise returns
false. This is similar to, but not the same as calling
QIODevice::atEnd(), as
QTextStream also takes into
account its internal Unicode buffer.
Upstream PySide2 reference signatures (binding differences may apply):
atEnd(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#atEnd
autoDetectUnicode
autoDetectUnicode() -> bool
X.autoDetectUnicode() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextStream::autoDetectUnicode() const
Returns true if automatic Unicode detection is enabled, otherwise returns false.
Automatic Unicode detection is enabled by default.
See also setAutoDetectUnicode(), setCodec(), and QTextCodec::codecForUtfText().
Upstream PySide2 reference signatures (binding differences may apply):
autoDetectUnicode(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#autoDetectUnicode
codec
codec() -> Any
X.codec() -> PythonQt.QtCore.QTextCodec
Supplemental documentation: Qt 5 reference:
QTextCodec *QTextStream::codec() const
Returns the codec that is current assigned to the stream.
See also setCodec(), setAutoDetectUnicode(), and locale().
Upstream PySide2 reference signatures (binding differences may apply):
codec(self) -> PySide2.QtCore.QTextCodec
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#codec
device
device() -> Any
X.device() -> PythonQt.QtCore.QIODevice
Supplemental documentation: Qt 5 reference:
QIODevice *QTextStream::device() const
Returns the current device associated with the
QTextStream, or nullptr if no
device has been assigned.
See also setDevice() and string().
Upstream PySide2 reference signatures (binding differences may apply):
device(self) -> PySide2.QtCore.QIODevice
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#device
fieldAlignment
fieldAlignment() -> Any
X.fieldAlignment()
Supplemental documentation: Qt 5 reference:
QTextStream::FieldAlignment QTextStream::fieldAlignment() const
Returns the current field alignment.
See also setFieldAlignment() and fieldWidth().
Upstream PySide2 reference signatures (binding differences may apply):
fieldAlignment(self) -> PySide2.QtCore.QTextStream.FieldAlignment
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#fieldAlignment
fieldWidth
fieldWidth() -> int
X.fieldWidth() -> int
Supplemental documentation: Qt 5 reference:
int QTextStream::fieldWidth() const
Returns the current field width.
See also setFieldWidth().
Upstream PySide2 reference signatures (binding differences may apply):
fieldWidth(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#fieldWidth
flush
flush() -> None
X.flush()
Supplemental documentation: Qt 5 reference:
void QTextStream::flush()
Flushes any buffered data waiting to be written to the device.
If QTextStream operates on a string, this function does nothing.
Upstream PySide2 reference signatures (binding differences may apply):
flush(self) -> None
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#flush
generateByteOrderMark
generateByteOrderMark() -> bool
X.generateByteOrderMark() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextStream::generateByteOrderMark() const
Returns true if QTextStream is
set to generate the UTF BOM (Byte Order Mark) when using a UTF codec; otherwise returns
false. UTF BOM generation is set to false by default.
See also setGenerateByteOrderMark().
Upstream PySide2 reference signatures (binding differences may apply):
generateByteOrderMark(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#generateByteOrderMark
integerBase
integerBase() -> int
X.integerBase() -> int
Supplemental documentation: Qt 5 reference:
int QTextStream::integerBase() const
Returns the current base of integers. 0 means that the base is detected when reading, or 10 (decimal) when generating numbers.
See also setIntegerBase(), QString::number(), and numberFlags().
Upstream PySide2 reference signatures (binding differences may apply):
integerBase(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#integerBase
locale
locale() -> Any
X.locale() -> PythonQt.QtCore.QLocale
Supplemental documentation: Qt 5 reference:
QLocale QTextStream::locale() const
Returns the locale for this stream. The default locale is C.
This function was introduced in Qt 4.5.
See also setLocale().
Upstream PySide2 reference signatures (binding differences may apply):
locale(self) -> PySide2.QtCore.QLocale
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#locale
numberFlags
numberFlags() -> Any
X.numberFlags()
Supplemental documentation: Qt 5 reference:
QTextStream::NumberFlags QTextStream::numberFlags() const
Returns the current number flags.
See also setNumberFlags(), integerBase(), and realNumberNotation().
Upstream PySide2 reference signatures (binding differences may apply):
numberFlags(self) -> PySide2.QtCore.QTextStream.NumberFlags
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#numberFlags
padChar
padChar() -> str
X.padChar()
Supplemental documentation: Qt 5 reference:
QChar QTextStream::padChar() const
Returns the current pad character.
See also setPadChar() and setFieldWidth().
Upstream PySide2 reference signatures (binding differences may apply):
padChar(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#padChar
pos
pos() -> int
X.pos() -> int
Supplemental documentation: Qt 5 reference:
qint64 QTextStream::pos() const
Returns the device position corresponding to the current position of the stream, or -1 if an error occurs (e.g., if there is no device or string, or if there's a device error).
Because QTextStream is buffered, this function may have to seek the device to reconstruct a valid device position. This operation can be expensive, so you may want to avoid calling this function in a tight loop.
This function was introduced in Qt 4.2.
See also seek().
Upstream PySide2 reference signatures (binding differences may apply):
pos(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#pos
read
read(maxlen: int) -> str
X.read(maxlen) -> str
Supplemental documentation: Qt 5 reference:
QString QTextStream::read(qint64 maxlen)
Reads at most maxlen characters from the stream, and returns the data read as a QString.
This function was introduced in Qt 4.1.
See also readAll(), readLine(), and QIODevice::read().
Upstream PySide2 reference signatures (binding differences may apply):
read(self, maxlen: int) -> str
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#read
readAll
readAll() -> str
X.readAll() -> str
Supplemental documentation: Qt 5 reference:
QString QTextStream::readAll()
Reads the entire content of the stream, and returns it as a QString. Avoid this function when working on large files, as it will consume a significant amount of memory.
Calling readLine() is better if you do not know how much data is available.
See also readLine().
Upstream PySide2 reference signatures (binding differences may apply):
readAll(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#readAll
readByte
readByte(ch: Any) -> Any
X.readByte(ch) -> PythonQt.QtCore.QTextStream
readDouble
readDouble(f: Any) -> Any
X.readDouble(f) -> PythonQt.QtCore.QTextStream
readFloat
readFloat(f: Any) -> Any
X.readFloat(f) -> PythonQt.QtCore.QTextStream
readInt
readInt(i: Any) -> Any
X.readInt(i) -> PythonQt.QtCore.QTextStream
readLine
readLine(maxlen: int) -> str
X.readLine(maxlen) -> str
Supplemental documentation: Qt 5 reference:
QString QTextStream::readLine(qint64 maxlen \= 0)
Reads one line of text from the stream, and returns it as a QString. The maximum allowed line length is set to maxlen. If the stream contains lines longer than this, then the lines will be split after maxlen characters and returned in parts.
If maxlen is 0, the lines can be of any length.
The returned line has no trailing end-of-line characters ("\n" or "\r\n"), so calling QString::trimmed() can be unnecessary.
If the stream has read to the end of the file, readLine() will return a null QString. For strings, or for devices that support it, you can explicitly test for the end of the stream using atEnd().
See also readAll() and QIODevice::readLine().
Upstream PySide2 reference signatures (binding differences may apply):
readLine(self, maxlen: int=...) -> str
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#readLine
readLineInto
readLineInto(line: Any, maxlen: Any) -> bool
X.readLineInto(line, maxlen) -> bool
Supplemental documentation: Qt 5 reference:
bool QTextStream::readLineInto(QString *line, qint64 maxlen \= 0)
Reads one line of text from the stream into line. If line is nullptr, the read
line is not stored.
The maximum allowed line length is set to maxlen. If the stream contains lines longer than this, then the lines will be split after maxlen characters and returned in parts.
If maxlen is 0, the lines can be of any length.
The resulting line has no trailing end-of-line characters ("\n" or "\r\n"), so calling QString::trimmed() can be unnecessary.
If line has sufficient capacity for the data that is about to be read, this function may not need to allocate new memory. Because of this, it can be faster than readLine().
Returns false if the stream has read to the end of the file or an error has occurred;
otherwise returns true. The contents in line before the call are discarded in any
case.
This function was introduced in Qt 5.5.
See also readAll() and QIODevice::readLine().
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#readLineInto
readLongLong
readLongLong(i: Any) -> Any
X.readLongLong(i) -> PythonQt.QtCore.QTextStream
readShort
readShort(i: Any) -> Any
X.readShort(i) -> PythonQt.QtCore.QTextStream
realNumberNotation
realNumberNotation() -> Any
X.realNumberNotation()
Supplemental documentation: Qt 5 reference:
QTextStream::RealNumberNotation QTextStream::realNumberNotation() const
Returns the current real number notation.
See also setRealNumberNotation(), realNumberPrecision(), numberFlags(), and integerBase().
Upstream PySide2 reference signatures (binding differences may apply):
realNumberNotation(self) -> PySide2.QtCore.QTextStream.RealNumberNotation
Source: https://doc.qt.io/archives/qt-5.15/qtextstream.html#realNumberNotation