PythonQt.QtGui.QAbstractScrollArea · declarations 001
Back to PythonQt.QtGui.QAbstractScrollArea
addScrollBarWidget
addScrollBarWidget(widget: Any, alignment: Any) -> None
X.addScrollBarWidget(widget, alignment)
Supplemental documentation: Qt 5 reference:
void QAbstractScrollArea::addScrollBarWidget(QWidget *widget, Qt::Alignment alignment)
Adds widget as a scroll bar widget in the location specified by alignment.
Scroll bar widgets are shown next to the horizontal or vertical scroll bar, and can be
placed on either side of it. If you want the scroll bar widgets to be always visible,
set the scrollBarPolicy for the corresponding scroll bar to AlwaysOn.
alignment must be one of Qt::Alignleft and Qt::AlignRight, which maps to the horizontal scroll bar, or Qt::AlignTop and Qt::AlignBottom, which maps to the vertical scroll bar.
A scroll bar widget can be removed by either re-parenting the widget or deleting it. It's also possible to hide a widget with QWidget::hide()
The scroll bar widget will be resized to fit the scroll bar geometry for the current style. The following describes the case for scroll bar widgets on the horizontal scroll bar:
The height of the widget will be set to match the height of the scroll bar. To control the width of the widget, use QWidget::setMinimumWidth and QWidget::setMaximumWidth, or implement QWidget::sizeHint() and set a horizontal size policy. If you want a square widget, call QStyle::pixelMetric(QStyle::PM_ScrollBarExtent) and set the width to this value.
This function was introduced in Qt 4.2.
See also scrollBarWidgets().
Upstream PySide2 reference signatures (binding differences may apply):
addScrollBarWidget(self, widget: PySide2.QtWidgets.QWidget, alignment: PySide2.QtCore.Qt.Alignment) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#addScrollBarWidget
contextMenuEvent
contextMenuEvent(arg__1: Any) -> None
X.contextMenuEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::contextMenuEvent(QContextMenuEvent *e)
Reimplements: QWidget::contextMenuEvent(QContextMenuEvent *event).
This event handler can be reimplemented in a subclass to receive context menu events for the viewport() widget. The event is passed in e.
See also QWidget::contextMenuEvent().
Upstream PySide2 reference signatures (binding differences may apply):
contextMenuEvent(self, arg__1: PySide2.QtGui.QContextMenuEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#contextMenuEvent
cornerWidget
cornerWidget() -> Any
X.cornerWidget() -> PythonQt.QtGui.QWidget
Supplemental documentation: Qt 5 reference:
QWidget *QAbstractScrollArea::cornerWidget() const
Returns the widget in the corner between the two scroll bars.
By default, no corner widget is present.
This function was introduced in Qt 4.2.
See also setCornerWidget().
Upstream PySide2 reference signatures (binding differences may apply):
cornerWidget(self) -> PySide2.QtWidgets.QWidget
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#cornerWidget
customContextMenuRequested
customContextMenuRequested(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QAbstractScrollArea.customContextMenuRequested; argument details are not documented.
destroyed
destroyed(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QAbstractScrollArea.destroyed; argument details are not documented.
dragEnterEvent
dragEnterEvent(arg__1: Any) -> None
X.dragEnterEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::dragEnterEvent(QDragEnterEvent *event)
Reimplements: QWidget::dragEnterEvent(QDragEnterEvent *event).
This event handler can be reimplemented in a subclass to receive drag enter events (passed in event), for the viewport() widget.
See also QWidget::dragEnterEvent().
Upstream PySide2 reference signatures (binding differences may apply):
dragEnterEvent(self, arg__1: PySide2.QtGui.QDragEnterEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#dragEnterEvent
dragLeaveEvent
dragLeaveEvent(arg__1: Any) -> None
X.dragLeaveEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::dragLeaveEvent(QDragLeaveEvent *event)
Reimplements: QWidget::dragLeaveEvent(QDragLeaveEvent *event).
This event handler can be reimplemented in a subclass to receive drag leave events (passed in event), for the viewport() widget.
See also QWidget::dragLeaveEvent().
Upstream PySide2 reference signatures (binding differences may apply):
dragLeaveEvent(self, arg__1: PySide2.QtGui.QDragLeaveEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#dragLeaveEvent
dragMoveEvent
dragMoveEvent(arg__1: Any) -> None
X.dragMoveEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::dragMoveEvent(QDragMoveEvent *event)
Reimplements: QWidget::dragMoveEvent(QDragMoveEvent *event).
This event handler can be reimplemented in a subclass to receive drag move events (passed in event), for the viewport() widget.
See also QWidget::dragMoveEvent().
Upstream PySide2 reference signatures (binding differences may apply):
dragMoveEvent(self, arg__1: PySide2.QtGui.QDragMoveEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#dragMoveEvent
dropEvent
dropEvent(arg__1: Any) -> None
X.dropEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::dropEvent(QDropEvent *event)
Reimplements: QWidget::dropEvent(QDropEvent *event).
This event handler can be reimplemented in a subclass to receive drop events (passed in event), for the viewport() widget.
See also QWidget::dropEvent().
Upstream PySide2 reference signatures (binding differences may apply):
dropEvent(self, arg__1: PySide2.QtGui.QDropEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#dropEvent
event
event(arg__1: Any) -> bool
X.event(arg__1) -> bool
Supplemental documentation: Qt 5 reference:
[override virtual protected] bool QAbstractScrollArea::event(QEvent *event)
Reimplements: QFrame::event(QEvent *e).
This is the main event handler for the QAbstractScrollArea widget (not the scrolling area viewport()). The specified event is a general event object that may need to be cast to the appropriate class depending on its type.
See also QEvent::type().
Upstream PySide2 reference signatures (binding differences may apply):
event(self, arg__1: PySide2.QtCore.QEvent) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#event
eventFilter
eventFilter(arg__1: Any, arg__2: Any) -> bool
X.eventFilter(arg__1, arg__2) -> bool
Upstream PySide2 reference signatures (binding differences may apply):
eventFilter(self, arg__1: PySide2.QtCore.QObject, arg__2: PySide2.QtCore.QEvent) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#eventFilter
horizontalScrollBar
horizontalScrollBar() -> Any
X.horizontalScrollBar() -> PythonQt.QtGui.QScrollBar
Supplemental documentation: Qt 5 reference:
QScrollBar *QAbstractScrollArea::horizontalScrollBar() const
Returns the horizontal scroll bar.
See also setHorizontalScrollBar(), horizontalScrollBarPolicy, and verticalScrollBar().
Upstream PySide2 reference signatures (binding differences may apply):
horizontalScrollBar(self) -> PySide2.QtWidgets.QScrollBar
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#horizontalScrollBar
horizontalScrollBarPolicy
instance-attribute
horizontalScrollBarPolicy: Any
Qt 5 reference:
horizontalScrollBarPolicy : Qt::ScrollBarPolicy
This property holds the policy for the horizontal scroll bar
The default policy is Qt::ScrollBarAsNeeded.
Access functions:
| Qt::ScrollBarPolicy | horizontalScrollBarPolicy() const |
|---|---|
| void | setHorizontalScrollBarPolicy(Qt::ScrollBarPolicy) |
See also verticalScrollBarPolicy.
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#horizontalScrollBarPolicy
keyPressEvent
keyPressEvent(arg__1: Any) -> None
X.keyPressEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::keyPressEvent(QKeyEvent *e)
Reimplements: QWidget::keyPressEvent(QKeyEvent *event).
This function is called with key event e when key presses occur. It handles PageUp, PageDown, Up, Down, Left, and Right, and ignores all other key presses.
Upstream PySide2 reference signatures (binding differences may apply):
keyPressEvent(self, arg__1: PySide2.QtGui.QKeyEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#keyPressEvent
maximumViewportSize
maximumViewportSize() -> Any
X.maximumViewportSize() -> PythonQt.QtCore.QSize
Supplemental documentation: Qt 5 reference:
QSize QAbstractScrollArea::maximumViewportSize() const
Returns the size of the viewport as if the scroll bars had no valid scrolling range.
Upstream PySide2 reference signatures (binding differences may apply):
maximumViewportSize(self) -> PySide2.QtCore.QSize
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#maximumViewportSize
minimumSizeHint
instance-attribute
minimumSizeHint: QSize
Qt 5 reference:
[override virtual] QSize QAbstractScrollArea::minimumSizeHint() const
Reimplements an access function for property: QWidget::minimumSizeHint.
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#minimumSizeHint
mouseDoubleClickEvent
mouseDoubleClickEvent(arg__1: Any) -> None
X.mouseDoubleClickEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::mouseDoubleClickEvent(QMouseEvent *e)
Reimplements: QWidget::mouseDoubleClickEvent(QMouseEvent *event).
This event handler can be reimplemented in a subclass to receive mouse double click events for the viewport() widget. The event is passed in e.
See also QWidget::mouseDoubleClickEvent().
Upstream PySide2 reference signatures (binding differences may apply):
mouseDoubleClickEvent(self, arg__1: PySide2.QtGui.QMouseEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#mouseDoubleClickEvent
mouseMoveEvent
mouseMoveEvent(arg__1: Any) -> None
X.mouseMoveEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::mouseMoveEvent(QMouseEvent *e)
Reimplements: QWidget::mouseMoveEvent(QMouseEvent *event).
This event handler can be reimplemented in a subclass to receive mouse move events for the viewport() widget. The event is passed in e.
See also QWidget::mouseMoveEvent().
Upstream PySide2 reference signatures (binding differences may apply):
mouseMoveEvent(self, arg__1: PySide2.QtGui.QMouseEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#mouseMoveEvent
mousePressEvent
mousePressEvent(arg__1: Any) -> None
X.mousePressEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::mousePressEvent(QMouseEvent *e)
Reimplements: QWidget::mousePressEvent(QMouseEvent *event).
This event handler can be reimplemented in a subclass to receive mouse press events for the viewport() widget. The event is passed in e.
The default implementation calls QWidget::mousePressEvent() for default popup handling.
See also QWidget::mousePressEvent().
Upstream PySide2 reference signatures (binding differences may apply):
mousePressEvent(self, arg__1: PySide2.QtGui.QMouseEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#mousePressEvent
mouseReleaseEvent
mouseReleaseEvent(arg__1: Any) -> None
X.mouseReleaseEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::mouseReleaseEvent(QMouseEvent *e)
Reimplements: QWidget::mouseReleaseEvent(QMouseEvent *event).
This event handler can be reimplemented in a subclass to receive mouse release events for the viewport() widget. The event is passed in e.
See also QWidget::mouseReleaseEvent().
Upstream PySide2 reference signatures (binding differences may apply):
mouseReleaseEvent(self, arg__1: PySide2.QtGui.QMouseEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#mouseReleaseEvent
objectNameChanged
objectNameChanged(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QAbstractScrollArea.objectNameChanged; argument details are not documented.
paintEvent
paintEvent(arg__1: Any) -> None
X.paintEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::paintEvent(QPaintEvent *event)
Reimplements: QFrame::paintEvent(QPaintEvent *).
This event handler can be reimplemented in a subclass to receive paint events (passed in event), for the viewport() widget.
Note: If you open a painter, make sure to open it on the viewport().
See also QWidget::paintEvent().
Upstream PySide2 reference signatures (binding differences may apply):
paintEvent(self, arg__1: PySide2.QtGui.QPaintEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#paintEvent
resizeEvent
resizeEvent(arg__1: Any) -> None
X.resizeEvent(arg__1)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QAbstractScrollArea::resizeEvent(QResizeEvent *event)
Reimplements: QWidget::resizeEvent(QResizeEvent *event).
This event handler can be reimplemented in a subclass to receive resize events (passed in event), for the viewport() widget.
When resizeEvent() is called, the viewport already has its new geometry: Its new size is accessible through the QResizeEvent::size() function, and the old size through QResizeEvent::oldSize().
See also QWidget::resizeEvent().
Upstream PySide2 reference signatures (binding differences may apply):
resizeEvent(self, arg__1: PySide2.QtGui.QResizeEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#resizeEvent
scrollBarWidgets
scrollBarWidgets(alignment: Any) -> tuple
X.scrollBarWidgets(alignment) -> tuple
Supplemental documentation: Qt 5 reference:
QWidgetList QAbstractScrollArea::scrollBarWidgets(Qt::Alignment alignment)
Returns a list of the currently set scroll bar widgets. alignment can be any combination of the four location flags.
This function was introduced in Qt 4.2.
See also addScrollBarWidget().
Upstream PySide2 reference signatures (binding differences may apply):
scrollBarWidgets(self, alignment: PySide2.QtCore.Qt.Alignment) -> typing.List[PySide2.QtWidgets.QWidget]
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#scrollBarWidgets
scrollContentsBy
scrollContentsBy(dx: int, dy: int) -> None
X.scrollContentsBy(dx, dy)
Supplemental documentation: Qt 5 reference:
[virtual protected] void QAbstractScrollArea::scrollContentsBy(int dx, int dy)
This virtual handler is called when the scroll bars are moved by dx, dy, and consequently the viewport's contents should be scrolled accordingly.
The default implementation simply calls update() on the entire viewport(), subclasses can reimplement this handler for optimization purposes, or - like QScrollArea - to move a contents widget. The parameters dx and dy are there for convenience, so that the class knows how much should be scrolled (useful e.g. when doing pixel-shifts). You may just as well ignore these values and scroll directly to the position the scroll bars indicate.
Calling this function in order to scroll programmatically is an error, use the scroll bars instead (e.g. by calling QScrollBar::setValue() directly).
Upstream PySide2 reference signatures (binding differences may apply):
scrollContentsBy(self, dx: int, dy: int) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#scrollContentsBy
setCornerWidget
setCornerWidget(widget: Any) -> None
X.setCornerWidget(widget)
Supplemental documentation: Qt 5 reference:
void QAbstractScrollArea::setCornerWidget(QWidget *widget)
Sets the widget in the corner between the two scroll bars to be widget.
You will probably also want to set at least one of the scroll bar modes to AlwaysOn.
Passing nullptr shows no widget in the corner.
Any previous corner widget is hidden.
You may call setCornerWidget() with the same widget at different times.
All widgets set here will be deleted by the scroll area when it is destroyed unless you
separately reparent the widget after setting some other corner widget (or nullptr).
Any newly set widget should have no current parent.
By default, no corner widget is present.
This function was introduced in Qt 4.2.
See also cornerWidget(), horizontalScrollBarPolicy, and horizontalScrollBarPolicy.
Upstream PySide2 reference signatures (binding differences may apply):
setCornerWidget(self, widget: PySide2.QtWidgets.QWidget) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setCornerWidget
setHorizontalScrollBar
setHorizontalScrollBar(scrollbar: Any) -> None
X.setHorizontalScrollBar(scrollbar)
Supplemental documentation: Qt 5 reference:
void QAbstractScrollArea::setHorizontalScrollBar(QScrollBar *scrollBar)
Replaces the existing horizontal scroll bar with scrollBar, and sets all the former scroll bar's slider properties on the new scroll bar. The former scroll bar is then deleted.
QAbstractScrollArea already provides horizontal and vertical scroll bars by default. You can call this function to replace the default horizontal scroll bar with your own custom scroll bar.
This function was introduced in Qt 4.2.
See also horizontalScrollBar() and setVerticalScrollBar().
Upstream PySide2 reference signatures (binding differences may apply):
setHorizontalScrollBar(self, scrollbar: PySide2.QtWidgets.QScrollBar) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setHorizontalScrollBar
setHorizontalScrollBarPolicy
setHorizontalScrollBarPolicy(arg__1: Any) -> None
X.setHorizontalScrollBarPolicy(arg__1)
Upstream PySide2 reference signatures (binding differences may apply):
setHorizontalScrollBarPolicy(self, arg__1: PySide2.QtCore.Qt.ScrollBarPolicy) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setHorizontalScrollBarPolicy
setSizeAdjustPolicy
setSizeAdjustPolicy(policy: Any) -> None
X.setSizeAdjustPolicy(policy)
Upstream PySide2 reference signatures (binding differences may apply):
setSizeAdjustPolicy(self, policy: PySide2.QtWidgets.QAbstractScrollArea.SizeAdjustPolicy) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setSizeAdjustPolicy
setVerticalScrollBar
setVerticalScrollBar(scrollbar: Any) -> None
X.setVerticalScrollBar(scrollbar)
Supplemental documentation: Qt 5 reference:
void QAbstractScrollArea::setVerticalScrollBar(QScrollBar *scrollBar)
Replaces the existing vertical scroll bar with scrollBar, and sets all the former scroll bar's slider properties on the new scroll bar. The former scroll bar is then deleted.
QAbstractScrollArea already provides vertical and horizontal scroll bars by default. You can call this function to replace the default vertical scroll bar with your own custom scroll bar.
This function was introduced in Qt 4.2.
See also verticalScrollBar() and setHorizontalScrollBar().
Upstream PySide2 reference signatures (binding differences may apply):
setVerticalScrollBar(self, scrollbar: PySide2.QtWidgets.QScrollBar) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setVerticalScrollBar
setVerticalScrollBarPolicy
setVerticalScrollBarPolicy(arg__1: Any) -> None
X.setVerticalScrollBarPolicy(arg__1)
Upstream PySide2 reference signatures (binding differences may apply):
setVerticalScrollBarPolicy(self, arg__1: PySide2.QtCore.Qt.ScrollBarPolicy) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setVerticalScrollBarPolicy
setViewport
setViewport(widget: Any) -> None
X.setViewport(widget)
Supplemental documentation: Qt 5 reference:
void QAbstractScrollArea::setViewport(QWidget *widget)
Sets the viewport to be the given widget. The QAbstractScrollArea will take ownership of the given widget.
If widget is nullptr,
QAbstractScrollArea will
assign a new QWidget instance for the
viewport.
This function was introduced in Qt 4.2.
See also viewport().
Upstream PySide2 reference signatures (binding differences may apply):
setViewport(self, widget: PySide2.QtWidgets.QWidget) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setViewport
setViewportMargins
setViewportMargins(left: Any, top: Any, right: Any, bottom: Any) -> None
X.setViewportMargins(left, top, right, bottom)
Supplemental documentation: Qt 5 reference:
[protected] void QAbstractScrollArea::setViewportMargins(int left, int top, int right, int bottom)
Sets the margins around the scrolling area to left, top, right and bottom. This is useful for applications such as spreadsheets with "locked" rows and columns. The marginal space is is left blank; put widgets in the unused area.
Note that this function is frequently called by QTreeView and QTableView, so margins must be implemented by QAbstractScrollArea subclasses. Also, if the subclasses are to be used in item views, they should not call this function.
By default all margins are zero.
See also viewportMargins().
[protected] void QAbstractScrollArea::setViewportMargins(const QMargins \&margins)
Sets margins around the scrolling area. This is useful for applications such as spreadsheets with "locked" rows and columns. The marginal space is is left blank; put widgets in the unused area.
By default all margins are zero.
This function was introduced in Qt 4.6.
See also viewportMargins().
Upstream PySide2 reference signatures (binding differences may apply):
setViewportMargins(self, left: int, top: int, right: int, bottom: int) -> None
setViewportMargins(self, margins: PySide2.QtCore.QMargins) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setViewportMargins
setupViewport
setupViewport(viewport: Any) -> None
X.setupViewport(viewport)
Supplemental documentation: Qt 5 reference:
[virtual] void QAbstractScrollArea::setupViewport(QWidget *viewport)
This slot is called by QAbstractScrollArea after setViewport(viewport) has been called. Reimplement this function in a subclass of QAbstractScrollArea to initialize the new viewport before it is used.
See also setViewport().
Upstream PySide2 reference signatures (binding differences may apply):
setupViewport(self, viewport: PySide2.QtWidgets.QWidget) -> None
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#setupViewport
sizeAdjustPolicy
instance-attribute
sizeAdjustPolicy: Any
Qt 5 reference:
sizeAdjustPolicy : SizeAdjustPolicy
This property holds the policy describing how the size of the scroll area changes when the size of the viewport changes.
The default policy is QAbstractScrollArea::AdjustIgnored. Changing this property might actually resize the scrollarea.
This property was introduced in Qt 5.2.
Access functions:
| QAbstractScrollArea::SizeAdjustPolicy | sizeAdjustPolicy() const |
|---|---|
| void | setSizeAdjustPolicy(QAbstractScrollArea::SizeAdjustPolicy policy) |
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#sizeAdjustPolicy
sizeHint
instance-attribute
sizeHint: QSize
Qt 5 reference:
[override virtual] QSize QAbstractScrollArea::sizeHint() const
Reimplements: QFrame::sizeHint() const.
Returns the sizeHint property of the scroll area. The size is determined by using viewportSizeHint() plus some extra space for scroll bars, if needed.
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#sizeHint
verticalScrollBar
verticalScrollBar() -> Any
X.verticalScrollBar() -> PythonQt.QtGui.QScrollBar
Supplemental documentation: Qt 5 reference:
QScrollBar *QAbstractScrollArea::verticalScrollBar() const
Returns the vertical scroll bar.
See also setVerticalScrollBar(), verticalScrollBarPolicy, and horizontalScrollBar().
Upstream PySide2 reference signatures (binding differences may apply):
verticalScrollBar(self) -> PySide2.QtWidgets.QScrollBar
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#verticalScrollBar
verticalScrollBarPolicy
instance-attribute
verticalScrollBarPolicy: Any
Qt 5 reference:
verticalScrollBarPolicy : Qt::ScrollBarPolicy
This property holds the policy for the vertical scroll bar
The default policy is Qt::ScrollBarAsNeeded.
Access functions:
| Qt::ScrollBarPolicy | verticalScrollBarPolicy() const |
|---|---|
| void | setVerticalScrollBarPolicy(Qt::ScrollBarPolicy) |
See also horizontalScrollBarPolicy.
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#verticalScrollBarPolicy
viewport
viewport() -> Any
X.viewport() -> PythonQt.QtGui.QWidget
Supplemental documentation: Qt 5 reference:
QWidget *QAbstractScrollArea::viewport() const
Returns the viewport widget.
Use the QScrollArea::widget() function to retrieve the contents of the viewport widget.
See also setViewport() and QScrollArea::widget().
Upstream PySide2 reference signatures (binding differences may apply):
viewport(self) -> PySide2.QtWidgets.QWidget
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#viewport
viewportEvent
viewportEvent(arg__1: Any) -> bool
X.viewportEvent(arg__1) -> bool
Supplemental documentation: Qt 5 reference:
[virtual protected] bool QAbstractScrollArea::viewportEvent(QEvent *event)
The main event handler for the scrolling area (the viewport() widget). It handles the event specified, and can be called by subclasses to provide reasonable default behavior.
Returns true to indicate to the event system that the event has been handled, and
needs no further processing; otherwise returns false to indicate that the event should
be propagated further.
You can reimplement this function in a subclass, but we recommend using one of the specialized event handlers instead.
Specialized handlers for viewport events are: paintEvent(), mousePressEvent(), mouseReleaseEvent(), mouseDoubleClickEvent(), mouseMoveEvent(), wheelEvent(), dragEnterEvent(), dragMoveEvent(), dragLeaveEvent(), dropEvent(), contextMenuEvent(), and resizeEvent().
Upstream PySide2 reference signatures (binding differences may apply):
viewportEvent(self, arg__1: PySide2.QtCore.QEvent) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qabstractscrollarea.html#viewportEvent