PythonQt.QtGui.QGraphicsItemAnimation · declarations 001
Back to PythonQt.QtGui.QGraphicsItemAnimation
afterAnimationStep
afterAnimationStep(step: float) -> None
X.afterAnimationStep(step)
Supplemental documentation: Qt 5 reference:
[virtual protected] void QGraphicsItemAnimation::afterAnimationStep(qreal step)
This method is meant to be overridden in subclasses that need to execute additional code after a new step has taken place. The animation step is provided for use in cases where the action depends on its value.
Upstream PySide2 reference signatures (binding differences may apply):
afterAnimationStep(self, step: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#afterAnimationStep
beforeAnimationStep
beforeAnimationStep(step: float) -> None
X.beforeAnimationStep(step)
Supplemental documentation: Qt 5 reference:
[virtual protected] void QGraphicsItemAnimation::beforeAnimationStep(qreal step)
This method is meant to be overridden by subclassed that needs to execute additional code before a new step takes place. The animation step is provided for use in cases where the action depends on its value.
Upstream PySide2 reference signatures (binding differences may apply):
beforeAnimationStep(self, step: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#beforeAnimationStep
clear
clear() -> None
X.clear()
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::clear()
Clears the scheduled transformations used for the animation, but retains the item and timeline.
Upstream PySide2 reference signatures (binding differences may apply):
clear(self) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#clear
destroyed
destroyed(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QGraphicsItemAnimation.destroyed; argument details are not documented.
horizontalScaleAt
horizontalScaleAt(step: float) -> float
X.horizontalScaleAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::horizontalScaleAt(qreal step) const
Returns the horizontal scale for the item at the specified step value.
See also setScaleAt().
Upstream PySide2 reference signatures (binding differences may apply):
horizontalScaleAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#horizontalScaleAt
horizontalShearAt
horizontalShearAt(step: float) -> float
X.horizontalShearAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::horizontalShearAt(qreal step) const
Returns the horizontal shear for the item at the specified step value.
See also setShearAt().
Upstream PySide2 reference signatures (binding differences may apply):
horizontalShearAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#horizontalShearAt
item
item() -> Any
X.item() -> PythonQt.QtGui.QGraphicsItem
Supplemental documentation: Qt 5 reference:
QGraphicsItem *QGraphicsItemAnimation::item() const
Returns the item on which the animation object operates.
See also setItem().
Upstream PySide2 reference signatures (binding differences may apply):
item(self) -> PySide2.QtWidgets.QGraphicsItem
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#item
matrixAt
matrixAt(step: float) -> Any
X.matrixAt(step) -> PythonQt.QtGui.QMatrix
Upstream PySide2 reference signatures (binding differences may apply):
matrixAt(self, step: float) -> PySide2.QtGui.QMatrix
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#matrixAt
objectNameChanged
objectNameChanged(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QGraphicsItemAnimation.objectNameChanged; argument details are not documented.
posAt
posAt(step: float) -> Any
X.posAt(step) -> PythonQt.QtCore.QPointF
Supplemental documentation: Qt 5 reference:
QPointF QGraphicsItemAnimation::posAt(qreal step) const
Returns the position of the item at the given step value.
See also setPosAt().
Upstream PySide2 reference signatures (binding differences may apply):
posAt(self, step: float) -> PySide2.QtCore.QPointF
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#posAt
posList
posList() -> tuple
X.posList() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPair\<qreal, QPointF>> QGraphicsItemAnimation::posList() const
Returns all explicitly inserted positions.
See also posAt() and setPosAt().
Upstream PySide2 reference signatures (binding differences may apply):
posList(self) -> typing.List[typing.Tuple[float, PySide2.QtCore.QPointF]]
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#posList
reset
reset() -> None
X.reset()
Upstream PySide2 reference signatures (binding differences may apply):
reset(self) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#reset
rotationAt
rotationAt(step: float) -> float
X.rotationAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::rotationAt(qreal step) const
Returns the angle at which the item is rotated at the specified step value.
See also setRotationAt().
Upstream PySide2 reference signatures (binding differences may apply):
rotationAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#rotationAt
rotationList
rotationList() -> tuple
X.rotationList() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPair\<qreal, qreal>> QGraphicsItemAnimation::rotationList() const
Returns all explicitly inserted rotations.
See also rotationAt() and setRotationAt().
Upstream PySide2 reference signatures (binding differences may apply):
rotationList(self) -> typing.List[typing.Tuple[float, float]]
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#rotationList
scaleList
scaleList() -> tuple
X.scaleList() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPair\<qreal, QPointF>> QGraphicsItemAnimation::scaleList() const
Returns all explicitly inserted scales.
See also verticalScaleAt(), horizontalScaleAt(), and setScaleAt().
Upstream PySide2 reference signatures (binding differences may apply):
scaleList(self) -> typing.List[typing.Tuple[float, PySide2.QtCore.QPointF]]
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#scaleList
setItem
setItem(item: Any) -> None
X.setItem(item)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setItem(QGraphicsItem *item)
Sets the specified item to be used in the animation.
See also item().
Upstream PySide2 reference signatures (binding differences may apply):
setItem(self, item: PySide2.QtWidgets.QGraphicsItem) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setItem
setPosAt
setPosAt(step: float, pos: Any) -> None
X.setPosAt(step, pos)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setPosAt(qreal step, const QPointF \&point)
Sets the position of the item at the given step value to the point specified.
See also posAt().
Upstream PySide2 reference signatures (binding differences may apply):
setPosAt(self, step: float, pos: PySide2.QtCore.QPointF) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setPosAt
setRotationAt
setRotationAt(step: float, angle: float) -> None
X.setRotationAt(step, angle)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setRotationAt(qreal step, qreal angle)
Sets the rotation of the item at the given step value to the angle specified.
See also rotationAt().
Upstream PySide2 reference signatures (binding differences may apply):
setRotationAt(self, step: float, angle: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setRotationAt
setScaleAt
setScaleAt(step: float, sx: float, sy: float) -> None
X.setScaleAt(step, sx, sy)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setScaleAt(qreal step, qreal sx, qreal sy)
Sets the scale of the item at the given step value using the horizontal and vertical scale factors specified by sx and sy.
See also verticalScaleAt() and horizontalScaleAt().
Upstream PySide2 reference signatures (binding differences may apply):
setScaleAt(self, step: float, sx: float, sy: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setScaleAt
setShearAt
setShearAt(step: float, sh: float, sv: float) -> None
X.setShearAt(step, sh, sv)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setShearAt(qreal step, qreal sh, qreal sv)
Sets the shear of the item at the given step value using the horizontal and vertical shear factors specified by sh and sv.
See also verticalShearAt() and horizontalShearAt().
Upstream PySide2 reference signatures (binding differences may apply):
setShearAt(self, step: float, sh: float, sv: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setShearAt
setStep
setStep(x: float) -> None
X.setStep(x)
Supplemental documentation: Qt 5 reference:
[slot] void QGraphicsItemAnimation::setStep(qreal step)
Sets the current step value for the animation, causing the transformations scheduled at this step to be performed.
Upstream PySide2 reference signatures (binding differences may apply):
setStep(self, x: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setStep
setTimeLine
setTimeLine(timeLine: Any) -> None
X.setTimeLine(timeLine)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setTimeLine(QTimeLine *timeLine)
Sets the timeline object used to control the rate of animation to the timeLine specified.
See also timeLine().
Upstream PySide2 reference signatures (binding differences may apply):
setTimeLine(self, timeLine: PySide2.QtCore.QTimeLine) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setTimeLine
setTranslationAt
setTranslationAt(step: float, dx: float, dy: float) -> None
X.setTranslationAt(step, dx, dy)
Supplemental documentation: Qt 5 reference:
void QGraphicsItemAnimation::setTranslationAt(qreal step, qreal dx, qreal dy)
Sets the translation of the item at the given step value using the horizontal and vertical coordinates specified by dx and dy.
See also xTranslationAt() and yTranslationAt().
Upstream PySide2 reference signatures (binding differences may apply):
setTranslationAt(self, step: float, dx: float, dy: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#setTranslationAt
shearList
shearList() -> tuple
X.shearList() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPair\<qreal, QPointF>> QGraphicsItemAnimation::shearList() const
Returns all explicitly inserted shears.
See also verticalShearAt(), horizontalShearAt(), and setShearAt().
Upstream PySide2 reference signatures (binding differences may apply):
shearList(self) -> typing.List[typing.Tuple[float, PySide2.QtCore.QPointF]]
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#shearList
timeLine
timeLine() -> Any
X.timeLine() -> PythonQt.QtCore.QTimeLine
Supplemental documentation: Qt 5 reference:
QTimeLine *QGraphicsItemAnimation::timeLine() const
Returns the timeline object used to control the rate at which the animation occurs.
See also setTimeLine().
Upstream PySide2 reference signatures (binding differences may apply):
timeLine(self) -> PySide2.QtCore.QTimeLine
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#timeLine
translationList
translationList() -> tuple
X.translationList() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPair\<qreal, QPointF>> QGraphicsItemAnimation::translationList() const
Returns all explicitly inserted translations.
See also xTranslationAt(), yTranslationAt(), and setTranslationAt().
Upstream PySide2 reference signatures (binding differences may apply):
translationList(self) -> typing.List[typing.Tuple[float, PySide2.QtCore.QPointF]]
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#translationList
verticalScaleAt
verticalScaleAt(step: float) -> float
X.verticalScaleAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::verticalScaleAt(qreal step) const
Returns the vertical scale for the item at the specified step value.
See also setScaleAt().
Upstream PySide2 reference signatures (binding differences may apply):
verticalScaleAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#verticalScaleAt
verticalShearAt
verticalShearAt(step: float) -> float
X.verticalShearAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::verticalShearAt(qreal step) const
Returns the vertical shear for the item at the specified step value.
See also setShearAt().
Upstream PySide2 reference signatures (binding differences may apply):
verticalShearAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#verticalShearAt
xTranslationAt
xTranslationAt(step: float) -> float
X.xTranslationAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::xTranslationAt(qreal step) const
Returns the horizontal translation of the item at the specified step value.
See also setTranslationAt().
Upstream PySide2 reference signatures (binding differences may apply):
xTranslationAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#xTranslationAt
yTranslationAt
yTranslationAt(step: float) -> float
X.yTranslationAt(step) -> float
Supplemental documentation: Qt 5 reference:
qreal QGraphicsItemAnimation::yTranslationAt(qreal step) const
Returns the vertical translation of the item at the specified step value.
See also setTranslationAt().
Upstream PySide2 reference signatures (binding differences may apply):
yTranslationAt(self, step: float) -> float
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsitemanimation.html#yTranslationAt