Skip to content

PythonQt.QtGui.QGraphicsScene · declarations 003

Back to PythonQt.QtGui.QGraphicsScene

setActiveWindow

setActiveWindow(widget: Any) -> None

X.setActiveWindow(widget)

Supplemental documentation: Qt 5 reference:

void QGraphicsScene::setActiveWindow(QGraphicsWidget *widget)

Activates widget, which must be a widget in this scene. You can also pass 0 for widget, in which case QGraphicsScene will deactivate any currently active window.

This function was introduced in Qt 4.4.

See also activeWindow() and QGraphicsWidget::isActiveWindow().

Upstream PySide2 reference signatures (binding differences may apply):

setActiveWindow(self, widget: PySide2.QtWidgets.QGraphicsWidget) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setActiveWindow

setBackgroundBrush

setBackgroundBrush(brush: Any) -> None

X.setBackgroundBrush(brush)

Upstream PySide2 reference signatures (binding differences may apply):

setBackgroundBrush(self, brush: PySide2.QtGui.QBrush) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setBackgroundBrush

setBspTreeDepth

setBspTreeDepth(depth: int) -> None

X.setBspTreeDepth(depth)

Upstream PySide2 reference signatures (binding differences may apply):

setBspTreeDepth(self, depth: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setBspTreeDepth

setFocus

setFocus(focusReason: Any) -> None

X.setFocus(focusReason)

Supplemental documentation: Qt 5 reference:

void QGraphicsScene::setFocus(Qt::FocusReason focusReason \= Qt::OtherFocusReason)

Sets focus on the scene by sending a QFocusEvent to the scene, passing focusReason as the reason. If the scene regains focus after having previously lost it while an item had focus, the last focus item will receive focus with focusReason as the reason.

If the scene already has focus, this function does nothing.

See also hasFocus(), clearFocus(), and setFocusItem().

Upstream PySide2 reference signatures (binding differences may apply):

setFocus(self, focusReason: PySide2.QtCore.Qt.FocusReason=...) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setFocus

setFocusItem

setFocusItem(item: Any, focusReason: Any) -> None

X.setFocusItem(item, focusReason)

Supplemental documentation: Qt 5 reference:

void QGraphicsScene::setFocusItem(QGraphicsItem *item, Qt::FocusReason focusReason \= Qt::OtherFocusReason)

Sets the scene's focus item to item, with the focus reason focusReason, after removing focus from any previous item that may have had focus.

If item is nullptr, or if it either does not accept focus (i.e., it does not have the QGraphicsItem::ItemIsFocusable flag enabled), or is not visible or not enabled, this function only removes focus from any previous focusitem.

If item is not nullptr, and the scene does not currently have focus (i.e., hasFocus() returns false), this function will call setFocus() automatically.

See also focusItem(), hasFocus(), and setFocus().

Upstream PySide2 reference signatures (binding differences may apply):

setFocusItem(self, item: PySide2.QtWidgets.QGraphicsItem, focusReason: PySide2.QtCore.Qt.FocusReason=...) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setFocusItem

setFont

setFont(font: Any) -> None

X.setFont(font)

Upstream PySide2 reference signatures (binding differences may apply):

setFont(self, font: PySide2.QtGui.QFont) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setFont

setForegroundBrush

setForegroundBrush(brush: Any) -> None

X.setForegroundBrush(brush)

Upstream PySide2 reference signatures (binding differences may apply):

setForegroundBrush(self, brush: PySide2.QtGui.QBrush) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setForegroundBrush

setItemIndexMethod

setItemIndexMethod(method: Any) -> None

X.setItemIndexMethod(method)

Upstream PySide2 reference signatures (binding differences may apply):

setItemIndexMethod(self, method: PySide2.QtWidgets.QGraphicsScene.ItemIndexMethod) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setItemIndexMethod

setMinimumRenderSize

setMinimumRenderSize(minSize: float) -> None

X.setMinimumRenderSize(minSize)

Upstream PySide2 reference signatures (binding differences may apply):

setMinimumRenderSize(self, minSize: float) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setMinimumRenderSize

setPalette

setPalette(palette: Any) -> None

X.setPalette(palette)

Upstream PySide2 reference signatures (binding differences may apply):

setPalette(self, palette: PySide2.QtGui.QPalette) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setPalette

setSceneRect

setSceneRect(x: Any, y: Any, w: Any, h: Any) -> None

X.setSceneRect(x, y, w, h)

Upstream PySide2 reference signatures (binding differences may apply):

setSceneRect(self, rect: PySide2.QtCore.QRectF) -> None
setSceneRect(self, x: float, y: float, w: float, h: float) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setSceneRect

setSelectionArea

setSelectionArea(path: Any, selectionOperation: Any, mode: Any, deviceTransform: Any) -> None

X.setSelectionArea(path, selectionOperation, mode, deviceTransform)

Supplemental documentation: Qt 5 reference:

void QGraphicsScene::setSelectionArea(const QPainterPath \&path, const QTransform \&deviceTransform)

Sets the selection area to path. All items within this area are immediately selected, and all items outside are unselected. You can get the list of all selected items by calling selectedItems().

deviceTransform is the transformation that applies to the view, and needs to be provided if the scene contains items that ignore transformations.

For an item to be selected, it must be marked as selectable (QGraphicsItem::ItemIsSelectable).

This function was introduced in Qt 4.6.

See also clearSelection() and selectionArea().

void QGraphicsScene::setSelectionArea(const QPainterPath \&path, Qt::ItemSelectionMode mode \= Qt::IntersectsItemShape, const QTransform \&deviceTransform \= QTransform())

This is an overloaded function.

Sets the selection area to path using mode to determine if items are included in the selection area.

deviceTransform is the transformation that applies to the view, and needs to be provided if the scene contains items that ignore transformations.

This function was introduced in Qt 4.6.

See also clearSelection() and selectionArea().

void QGraphicsScene::setSelectionArea(const QPainterPath \&path, Qt::ItemSelectionOperation selectionOperation, Qt::ItemSelectionMode mode \= Qt::IntersectsItemShape, const QTransform \&deviceTransform \= QTransform())

This is an overloaded function.

Sets the selection area to path using mode to determine if items are included in the selection area.

deviceTransform is the transformation that applies to the view, and needs to be provided if the scene contains items that ignore transformations.

selectionOperation determines what to do with the currently selected items.

This function was introduced in Qt 5.5.

See also clearSelection() and selectionArea().

Upstream PySide2 reference signatures (binding differences may apply):

setSelectionArea(self, path: PySide2.QtGui.QPainterPath, deviceTransform: PySide2.QtGui.QTransform) -> None
setSelectionArea(self, path: PySide2.QtGui.QPainterPath, mode: PySide2.QtCore.Qt.ItemSelectionMode=..., deviceTransform: PySide2.QtGui.QTransform=...) -> None
setSelectionArea(self, path: PySide2.QtGui.QPainterPath, selectionOperation: PySide2.QtCore.Qt.ItemSelectionOperation, mode: PySide2.QtCore.Qt.ItemSelectionMode=..., deviceTransform: PySide2.QtGui.QTransform=...) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setSelectionArea

setSortCacheEnabled

setSortCacheEnabled(enabled: bool) -> None

X.setSortCacheEnabled(enabled)

Upstream PySide2 reference signatures (binding differences may apply):

setSortCacheEnabled(self, enabled: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setSortCacheEnabled

setStickyFocus

setStickyFocus(enabled: bool) -> None

X.setStickyFocus(enabled)

Upstream PySide2 reference signatures (binding differences may apply):

setStickyFocus(self, enabled: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setStickyFocus

setStyle

setStyle(style: Any) -> None

X.setStyle(style)

Supplemental documentation: Qt 5 reference:

void QGraphicsScene::setStyle(QStyle *style)

Sets or replaces the style of the scene to style, and reparents the style to this scene. Any previously assigned style is deleted. The scene's style defaults to QApplication::style(), and serves as the default for all QGraphicsWidget items in the scene.

Changing the style, either directly by calling this function, or indirectly by calling QApplication::setStyle(), will automatically update the style for all widgets in the scene that do not have a style explicitly assigned to them.

If style is nullptr, QGraphicsScene will revert to QApplication::style().

This function was introduced in Qt 4.4.

See also style().

Upstream PySide2 reference signatures (binding differences may apply):

setStyle(self, style: PySide2.QtWidgets.QStyle) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#setStyle

sortCacheEnabled instance-attribute

sortCacheEnabled: Any

stickyFocus instance-attribute

stickyFocus: bool

Qt 5 reference:

stickyFocus : bool

This property holds whether clicking into the scene background will clear focus

In a QGraphicsScene with stickyFocus set to true, focus will remain unchanged when the user clicks into the scene background or on an item that does not accept focus. Otherwise, focus will be cleared.

By default, this property is false.

Focus changes in response to a mouse press. You can reimplement mousePressEvent() in a subclass of QGraphicsScene to toggle this property based on where the user has clicked.

This property was introduced in Qt 4.6.

Access functions:

bool stickyFocus() const
void setStickyFocus(bool enabled)

See also clearFocus() and setFocusItem().

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#stickyFocus

style

style() -> Any

X.style() -> PythonQt.QtGui.QStyle

Supplemental documentation: Qt 5 reference:

QStyle *QGraphicsScene::style() const

Returns the scene's style, or the same as QApplication::style() if the scene has not been explicitly assigned a style.

This function was introduced in Qt 4.4.

See also setStyle().

Upstream PySide2 reference signatures (binding differences may apply):

style(self) -> PySide2.QtWidgets.QStyle

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#style

update

update(x: Any, y: Any, w: Any, h: Any) -> None

X.update(x, y, w, h)

Supplemental documentation: Qt 5 reference:

[slot] void QGraphicsScene::update(const QRectF \&rect \= QRectF())

Schedules a redraw of the area rect on the scene.

See also sceneRect() and changed().

void QGraphicsScene::update(qreal x, qreal y, qreal w, qreal h)

This is an overloaded function.

This function is equivalent to calling update(QRectF(x, y, w, h));

This function was introduced in Qt 4.3.

Upstream PySide2 reference signatures (binding differences may apply):

update(self, rect: PySide2.QtCore.QRectF=...) -> None
update(self, x: float, y: float, w: float, h: float) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#update

views

views() -> tuple

X.views() -> tuple

Supplemental documentation: Qt 5 reference:

QList\<QGraphicsView *> QGraphicsScene::views() const

Returns a list of all the views that display this scene.

See also QGraphicsView::scene().

Upstream PySide2 reference signatures (binding differences may apply):

views(self) -> typing.List[PySide2.QtWidgets.QGraphicsView]

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#views

wheelEvent

wheelEvent(event: Any) -> None

X.wheelEvent(event)

Supplemental documentation: Qt 5 reference:

[virtual protected] void QGraphicsScene::wheelEvent(QGraphicsSceneWheelEvent *wheelEvent)

This event handler, for event wheelEvent, can be reimplemented in a subclass to receive mouse wheel events for the scene.

By default, the event is delivered to the topmost visible item under the cursor. If ignored, the event propagates to the item beneath, and again until the event is accepted, or it reaches the scene. If no items accept the event, it is ignored.

Note: See items() for a definition of which items are considered visible by this function.

See also QGraphicsItem::wheelEvent().

Upstream PySide2 reference signatures (binding differences may apply):

wheelEvent(self, event: PySide2.QtWidgets.QGraphicsSceneWheelEvent) -> None

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#wheelEvent

width

width() -> float

X.width() -> float

Supplemental documentation: Qt 5 reference:

qreal QGraphicsScene::width() const

This convenience function is equivalent to calling sceneRect().width().

See also height().

Upstream PySide2 reference signatures (binding differences may apply):

width(self) -> float

Source: https://doc.qt.io/archives/qt-5.15/qgraphicsscene.html#width