PythonQt.QtGui.QGraphicsView · declarations 003
Back to PythonQt.QtGui.QGraphicsView
setAlignment
setAlignment(alignment: Any) -> None
X.setAlignment(alignment)
Upstream PySide2 reference signatures (binding differences may apply):
setAlignment(self, alignment: PySide2.QtCore.Qt.Alignment) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setAlignment
setBackgroundBrush
setBackgroundBrush(brush: Any) -> None
X.setBackgroundBrush(brush)
Upstream PySide2 reference signatures (binding differences may apply):
setBackgroundBrush(self, brush: PySide2.QtGui.QBrush) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setBackgroundBrush
setCacheMode
setCacheMode(mode: Any) -> None
X.setCacheMode(mode)
Upstream PySide2 reference signatures (binding differences may apply):
setCacheMode(self, mode: PySide2.QtWidgets.QGraphicsView.CacheMode) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setCacheMode
setDragMode
setDragMode(mode: Any) -> None
X.setDragMode(mode)
Upstream PySide2 reference signatures (binding differences may apply):
setDragMode(self, mode: PySide2.QtWidgets.QGraphicsView.DragMode) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setDragMode
setForegroundBrush
setForegroundBrush(brush: Any) -> None
X.setForegroundBrush(brush)
Upstream PySide2 reference signatures (binding differences may apply):
setForegroundBrush(self, brush: PySide2.QtGui.QBrush) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setForegroundBrush
setInteractive
setInteractive(allowed: bool) -> None
X.setInteractive(allowed)
Upstream PySide2 reference signatures (binding differences may apply):
setInteractive(self, allowed: bool) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setInteractive
setMatrix
setMatrix(matrix: Any, combine: bool) -> None
X.setMatrix(matrix, combine)
Upstream PySide2 reference signatures (binding differences may apply):
setMatrix(self, matrix: PySide2.QtGui.QMatrix, combine: bool=...) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setMatrix
setOptimizationFlag
setOptimizationFlag(arg0: flag, enabled: bool) -> None
X.setOptimizationFlag(flag, enabled)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::setOptimizationFlag(QGraphicsView::OptimizationFlag flag, bool enabled \= true)
Enables flag if enabled is true; otherwise disables flag.
See also optimizationFlags.
Upstream PySide2 reference signatures (binding differences may apply):
setOptimizationFlag(self, flag: PySide2.QtWidgets.QGraphicsView.OptimizationFlag, enabled: bool=...) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setOptimizationFlag
setOptimizationFlags
setOptimizationFlags(arg0: flags) -> None
X.setOptimizationFlags(flags)
Upstream PySide2 reference signatures (binding differences may apply):
setOptimizationFlags(self, flags: PySide2.QtWidgets.QGraphicsView.OptimizationFlags) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setOptimizationFlags
setRenderHint
setRenderHint(hint: Any, enabled: bool) -> None
X.setRenderHint(hint, enabled)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::setRenderHint(QPainter::RenderHint hint, bool enabled \= true)
If enabled is true, the render hint hint is enabled; otherwise it is disabled.
See also renderHints.
Upstream PySide2 reference signatures (binding differences may apply):
setRenderHint(self, hint: PySide2.QtGui.QPainter.RenderHint, enabled: bool=...) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setRenderHint
setRenderHints
setRenderHints(hints: Any) -> None
X.setRenderHints(hints)
Upstream PySide2 reference signatures (binding differences may apply):
setRenderHints(self, hints: PySide2.QtGui.QPainter.RenderHints) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setRenderHints
setResizeAnchor
setResizeAnchor(anchor: Any) -> None
X.setResizeAnchor(anchor)
Upstream PySide2 reference signatures (binding differences may apply):
setResizeAnchor(self, anchor: PySide2.QtWidgets.QGraphicsView.ViewportAnchor) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setResizeAnchor
setRubberBandSelectionMode
setRubberBandSelectionMode(mode: Any) -> None
X.setRubberBandSelectionMode(mode)
Upstream PySide2 reference signatures (binding differences may apply):
setRubberBandSelectionMode(self, mode: PySide2.QtCore.Qt.ItemSelectionMode) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setRubberBandSelectionMode
setScene
setScene(scene: Any) -> None
X.setScene(scene)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::setScene(QGraphicsScene *scene)
Sets the current scene to scene. If scene is already being viewed, this function does nothing.
When a scene is set on a view, the QGraphicsScene::changed() signal is automatically connected to this view's updateScene() slot, and the view's scroll bars are adjusted to fit the size of the scene.
The view does not take ownership of scene.
See also scene().
Upstream PySide2 reference signatures (binding differences may apply):
setScene(self, scene: PySide2.QtWidgets.QGraphicsScene) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setScene
setSceneRect
setSceneRect(x: Any, y: Any, w: Any, h: Any) -> None
X.setSceneRect(x, y, w, h)
Upstream PySide2 reference signatures (binding differences may apply):
setSceneRect(self, rect: PySide2.QtCore.QRectF) -> None
setSceneRect(self, x: float, y: float, w: float, h: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setSceneRect
setTransform
setTransform(matrix: Any, combine: bool) -> None
X.setTransform(matrix, combine)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::setTransform(const QTransform \&matrix, bool combine \= false)
Sets the view's current transformation matrix to matrix.
If combine is true, then matrix is combined with the current matrix; otherwise, matrix replaces the current matrix. combine is false by default.
The transformation matrix transforms the scene into view coordinates. Using the default transformation, provided by the identity matrix, one pixel in the view represents one unit in the scene (e.g., a 10x10 rectangular item is drawn using 10x10 pixels in the view). If a 2x2 scaling matrix is applied, the scene will be drawn in 1:2 (e.g., a 10x10 rectangular item is then drawn using 20x20 pixels in the view).
Example:
QGraphicsScene scene;
scene.addText("GraphicsView rotated clockwise");
QGraphicsView view(&scene);
view.rotate(90); // the text is rendered with a 90 degree clockwise rotation
view.show();
To simplify interation with items using a transformed view, QGraphicsView provides mapTo... and mapFrom... functions that can translate between scene and view coordinates. For example, you can call mapToScene() to map a view coordinate to a floating point scene coordinate, or mapFromScene() to map from floating point scene coordinates to view coordinates.
See also transform(), rotate(), scale(), shear(), and translate().
Upstream PySide2 reference signatures (binding differences may apply):
setTransform(self, matrix: PySide2.QtGui.QTransform, combine: bool=...) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setTransform
setTransformationAnchor
setTransformationAnchor(anchor: Any) -> None
X.setTransformationAnchor(anchor)
Upstream PySide2 reference signatures (binding differences may apply):
setTransformationAnchor(self, anchor: PySide2.QtWidgets.QGraphicsView.ViewportAnchor) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setTransformationAnchor
setViewportUpdateMode
setViewportUpdateMode(mode: Any) -> None
X.setViewportUpdateMode(mode)
Upstream PySide2 reference signatures (binding differences may apply):
setViewportUpdateMode(self, mode: PySide2.QtWidgets.QGraphicsView.ViewportUpdateMode) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setViewportUpdateMode
setupViewport
setupViewport(widget: Any) -> None
X.setupViewport(widget)
Supplemental documentation: Qt 5 reference:
[override virtual protected slot] void QGraphicsView::setupViewport(QWidget *widget)
Reimplements: QAbstractScrollArea::setupViewport(QWidget *viewport).
This slot is called by QAbstractScrollArea after setViewport() has been called. Reimplement this function in a subclass of QGraphicsView to initialize the new viewport widget before it is used.
See also setViewport().
Upstream PySide2 reference signatures (binding differences may apply):
setupViewport(self, widget: PySide2.QtWidgets.QWidget) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#setupViewport
shear
shear(sh: float, sv: float) -> None
X.shear(sh, sv)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::shear(qreal sh, qreal sv)
Shears the current view transformation by (sh, sv).
See also setTransform(), transform(), rotate(), scale(), and translate().
Upstream PySide2 reference signatures (binding differences may apply):
shear(self, sh: float, sv: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#shear
showEvent
showEvent(event: Any) -> None
X.showEvent(event)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QGraphicsView::showEvent(QShowEvent *event)
Reimplements: QWidget::showEvent(QShowEvent *event).
Upstream PySide2 reference signatures (binding differences may apply):
showEvent(self, event: PySide2.QtGui.QShowEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#showEvent
sizeHint
instance-attribute
sizeHint: QSize
Qt 5 reference:
[override virtual] QSize QGraphicsView::sizeHint() const
Reimplements: QAbstractScrollArea::sizeHint() const.
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#sizeHint
transform
transform() -> Any
X.transform() -> PythonQt.QtGui.QTransform
Supplemental documentation: Qt 5 reference:
QTransform QGraphicsView::transform() const
Returns the current transformation matrix for the view. If no current transformation is set, the identity matrix is returned.
See also setTransform(), rotate(), scale(), shear(), and translate().
Upstream PySide2 reference signatures (binding differences may apply):
transform(self) -> PySide2.QtGui.QTransform
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#transform
transformationAnchor
instance-attribute
transformationAnchor: Any
Qt 5 reference:
transformationAnchor : ViewportAnchor
how the view should position the scene during transformations.
QGraphicsView uses this property to decide how to position the scene in the viewport when the transformation matrix changes, and the coordinate system of the view is transformed. The default behavior, AnchorViewCenter, ensures that the scene point at the center of the view remains unchanged during transformations (e.g., when rotating, the scene will appear to rotate around the center of the view).
Note that the effect of this property is noticeable when only a part of the scene is visible (i.e., when there are scroll bars). Otherwise, if the whole scene fits in the view, QGraphicsScene uses the view alignment to position the scene in the view.
Access functions:
| QGraphicsView::ViewportAnchor | transformationAnchor() const |
|---|---|
| void | setTransformationAnchor(QGraphicsView::ViewportAnchor anchor) |
See also alignment and resizeAnchor.
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#transformationAnchor
translate
translate(dx: float, dy: float) -> None
X.translate(dx, dy)
Supplemental documentation: Qt 5 reference:
void QGraphicsView::translate(qreal dx, qreal dy)
Translates the current view transformation by (dx, dy).
See also setTransform(), transform(), rotate(), and shear().
Upstream PySide2 reference signatures (binding differences may apply):
translate(self, dx: float, dy: float) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#translate
updateScene
updateScene(rects: Any) -> None
X.updateScene(rects)
Supplemental documentation: Qt 5 reference:
[slot] void QGraphicsView::updateScene(const QList\<QRectF> \&rects)
Schedules an update of the scene rectangles rects.
See also QGraphicsScene::changed().
Upstream PySide2 reference signatures (binding differences may apply):
updateScene(self, rects: typing.Sequence[PySide2.QtCore.QRectF]) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#updateScene
updateSceneRect
updateSceneRect(rect: Any) -> None
X.updateSceneRect(rect)
Supplemental documentation: Qt 5 reference:
[slot] void QGraphicsView::updateSceneRect(const QRectF \&rect)
Notifies QGraphicsView that the scene's scene rect has changed. rect is the new scene rect. If the view already has an explicitly set scene rect, this function does nothing.
See also sceneRect and QGraphicsScene::sceneRectChanged().
Upstream PySide2 reference signatures (binding differences may apply):
updateSceneRect(self, rect: PySide2.QtCore.QRectF) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#updateSceneRect
viewportEvent
viewportEvent(event: Any) -> bool
X.viewportEvent(event) -> bool
Supplemental documentation: Qt 5 reference:
[override virtual protected] bool QGraphicsView::viewportEvent(QEvent *event)
Reimplements: QAbstractScrollArea::viewportEvent(QEvent *event).
Upstream PySide2 reference signatures (binding differences may apply):
viewportEvent(self, event: PySide2.QtCore.QEvent) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#viewportEvent
viewportTransform
viewportTransform() -> Any
X.viewportTransform() -> PythonQt.QtGui.QTransform
Supplemental documentation: Qt 5 reference:
QTransform QGraphicsView::viewportTransform() const
Returns a matrix that maps scene coordinates to viewport coordinates.
See also mapToScene() and mapFromScene().
Upstream PySide2 reference signatures (binding differences may apply):
viewportTransform(self) -> PySide2.QtGui.QTransform
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#viewportTransform
viewportUpdateMode
instance-attribute
viewportUpdateMode: Any
Qt 5 reference:
viewportUpdateMode : ViewportUpdateMode
how the viewport should update its contents.
QGraphicsView uses this property to decide how to update areas of the scene that have been reexposed or changed. Usually you do not need to modify this property, but there are some cases where doing so can improve rendering performance. See the ViewportUpdateMode documentation for specific details.
The default value is MinimalViewportUpdate, where QGraphicsView will update as small an area of the viewport as possible when the contents change.
This property was introduced in Qt 4.3.
Access functions:
| QGraphicsView::ViewportUpdateMode | viewportUpdateMode() const |
|---|---|
| void | setViewportUpdateMode(QGraphicsView::ViewportUpdateMode mode) |
See also ViewportUpdateMode and cacheMode.
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#viewportUpdateMode
wheelEvent
wheelEvent(event: Any) -> None
X.wheelEvent(event)
Supplemental documentation: Qt 5 reference:
[override virtual protected] void QGraphicsView::wheelEvent(QWheelEvent *event)
Reimplements: QAbstractScrollArea::wheelEvent(QWheelEvent *e).
Upstream PySide2 reference signatures (binding differences may apply):
wheelEvent(self, event: PySide2.QtGui.QWheelEvent) -> None
Source: https://doc.qt.io/archives/qt-5.15/qgraphicsview.html#wheelEvent
windowIconChanged
windowIconChanged(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QGraphicsView.windowIconChanged; argument details are not documented.
windowIconTextChanged
windowIconTextChanged(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QGraphicsView.windowIconTextChanged; argument details are not documented.
windowTitleChanged
windowTitleChanged(*args: Any, **kwargs: Any) -> Any
Native PythonQt.QtGui.QGraphicsView.windowTitleChanged; argument details are not documented.