Skip to content

PythonQt.QtGui.QLineEdit · declarations 003

Back to PythonQt.QtGui.QLineEdit

selectionStart

selectionStart() -> int

X.selectionStart() -> int

Supplemental documentation: Qt 5 reference:

int QLineEdit::selectionStart() const

Returns the index of the first selected character in the line edit or -1 if no text is selected.

See also selectedText(), selectionEnd(), and selectionLength().

Upstream PySide2 reference signatures (binding differences may apply):

selectionStart(self) -> int

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#selectionStart

setAlignment

setAlignment(arg0: flag) -> None

X.setAlignment(flag)

Upstream PySide2 reference signatures (binding differences may apply):

setAlignment(self, flag: PySide2.QtCore.Qt.Alignment) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setAlignment

setClearButtonEnabled

setClearButtonEnabled(enable: bool) -> None

X.setClearButtonEnabled(enable)

Upstream PySide2 reference signatures (binding differences may apply):

setClearButtonEnabled(self, enable: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setClearButtonEnabled

setCompleter

setCompleter(completer: Any) -> None

X.setCompleter(completer)

Supplemental documentation: Qt 5 reference:

void QLineEdit::setCompleter(QCompleter *c)

Sets this line edit to provide auto completions from the completer, c. The completion mode is set using QCompleter::setCompletionMode().

To use a QCompleter with a QValidator or QLineEdit::inputMask, you need to ensure that the model provided to QCompleter contains valid entries. You can use the QSortFilterProxyModel to ensure that the QCompleter's model contains only valid entries.

If c \=\= 0, setCompleter() removes the current completer, effectively disabling auto completion.

This function was introduced in Qt 4.2.

See also completer() and QCompleter.

Upstream PySide2 reference signatures (binding differences may apply):

setCompleter(self, completer: PySide2.QtWidgets.QCompleter) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setCompleter

setCursorMoveStyle

setCursorMoveStyle(style: Any) -> None

X.setCursorMoveStyle(style)

Upstream PySide2 reference signatures (binding differences may apply):

setCursorMoveStyle(self, style: PySide2.QtCore.Qt.CursorMoveStyle) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setCursorMoveStyle

setCursorPosition

setCursorPosition(arg__1: int) -> None

X.setCursorPosition(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setCursorPosition(self, arg__1: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setCursorPosition

setDragEnabled

setDragEnabled(b: bool) -> None

X.setDragEnabled(b)

Upstream PySide2 reference signatures (binding differences may apply):

setDragEnabled(self, b: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setDragEnabled

setEchoMode

setEchoMode(arg__1: Any) -> None

X.setEchoMode(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setEchoMode(self, arg__1: PySide2.QtWidgets.QLineEdit.EchoMode) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setEchoMode

setFrame

setFrame(arg__1: bool) -> None

X.setFrame(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setFrame(self, arg__1: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setFrame

setInputMask

setInputMask(inputMask: str) -> None

X.setInputMask(inputMask)

Upstream PySide2 reference signatures (binding differences may apply):

setInputMask(self, inputMask: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setInputMask

setMaxLength

setMaxLength(arg__1: int) -> None

X.setMaxLength(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setMaxLength(self, arg__1: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setMaxLength

setModified

setModified(arg__1: bool) -> None

X.setModified(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setModified(self, arg__1: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setModified

setPlaceholderText

setPlaceholderText(arg__1: str) -> None

X.setPlaceholderText(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setPlaceholderText(self, arg__1: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setPlaceholderText

setReadOnly

setReadOnly(arg__1: bool) -> None

X.setReadOnly(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setReadOnly(self, arg__1: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setReadOnly

setSelection

setSelection(arg__1: int, arg__2: int) -> None

X.setSelection(arg__1, arg__2)

Supplemental documentation: Qt 5 reference:

void QLineEdit::setSelection(int start, int length)

Selects text from position start and for length characters. Negative lengths are allowed.

See also deselect(), selectAll(), and selectedText().

Upstream PySide2 reference signatures (binding differences may apply):

setSelection(self, arg__1: int, arg__2: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setSelection

setText

setText(a: Any) -> None

X.setText(a)

Upstream PySide2 reference signatures (binding differences may apply):

setText(self, arg__1: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setText

setTextMargins

setTextMargins(left: Any, top: Any, right: Any, bottom: Any) -> None

X.setTextMargins(left, top, right, bottom)

Supplemental documentation: Qt 5 reference:

void QLineEdit::setTextMargins(int left, int top, int right, int bottom)

Sets the margins around the text inside the frame to have the sizes left, top, right, and bottom.

See also textMargins().

This function was introduced in Qt 4.5.

See also textMargins().

void QLineEdit::setTextMargins(const QMargins \&margins)

Sets the margins around the text inside the frame.

See also textMargins().

This function was introduced in Qt 4.6.

Upstream PySide2 reference signatures (binding differences may apply):

setTextMargins(self, left: int, top: int, right: int, bottom: int) -> None
setTextMargins(self, margins: PySide2.QtCore.QMargins) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setTextMargins

setValidator

setValidator(arg__1: Any) -> None

X.setValidator(arg__1)

Supplemental documentation: Qt 5 reference:

void QLineEdit::setValidator(const QValidator *v)

Sets the validator for values of line edit to v.

The line edit's returnPressed() and editingFinished() signals will only be emitted if v validates the line edit's content as Acceptable. The user may change the content to any Intermediate value during editing, but will be prevented from editing the text to a value that v validates as Invalid.

This allows you to constrain the text that shall finally be entered when editing is done, while leaving users with enough freedom to edit the text from one valid state to another.

If v \=\= 0, setValidator() removes the current input validator. The initial setting is to have no input validator (i.e. any input is accepted up to maxLength()).

See also validator(), hasAcceptableInput(), QIntValidator, QDoubleValidator, and QRegExpValidator.

Upstream PySide2 reference signatures (binding differences may apply):

setValidator(self, arg__1: PySide2.QtGui.QValidator) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#setValidator

sizeHint instance-attribute

sizeHint: QSize

Qt 5 reference:

[override virtual] QSize QLineEdit::sizeHint() const

Reimplements an access function for property: QWidget::sizeHint.

Returns a recommended size for the widget.

The width returned, in pixels, is usually enough for about 15 to 20 characters.

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#sizeHint

text instance-attribute

text: str

Qt 5 reference:

text : QString

This property holds the line edit's text.

Setting this property clears the selection, clears the undo/redo history, moves the cursor to the end of the line and resets the modified property to false. The text is not validated when inserted with setText().

The text is truncated to maxLength() length.

By default, this property contains an empty string.

Access functions:

QString text() const
void setText(const QString \&)

Notifier signal:

void textChanged(const QString \&text)

See also insert() and clear().

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#text

textChanged

textChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QLineEdit.textChanged; argument details are not documented.

Supplemental documentation: Qt 5 reference:

[signal] void QLineEdit::textChanged(const QString \&text)

This signal is emitted whenever the text changes. The text argument is the new text.

Unlike textEdited(), this signal is also emitted when the text is changed programmatically, for example, by calling setText().

Note: Notifier signal for property text.

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#textChanged

textEdited

textEdited(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QLineEdit.textEdited; argument details are not documented.

Supplemental documentation: Qt 5 reference:

[signal] void QLineEdit::textEdited(const QString \&text)

This signal is emitted whenever the text is edited. The text argument is the new text.

Unlike textChanged(), this signal is not emitted when the text is changed programmatically, for example, by calling setText().

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#textEdited

textMargins

textMargins() -> Any

X.textMargins() -> PythonQt.QtGui.QMargins

Supplemental documentation: Qt 5 reference:

QMargins QLineEdit::textMargins() const

Returns the widget's text margins.

This function was introduced in Qt 4.6.

See also setTextMargins().

Upstream PySide2 reference signatures (binding differences may apply):

textMargins(self) -> PySide2.QtCore.QMargins

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#textMargins

undo

undo() -> None

X.undo()

Supplemental documentation: Qt 5 reference:

[slot] void QLineEdit::undo()

Undoes the last operation if undo is available. Deselects any current selection, and updates the selection start to the current cursor position.

Upstream PySide2 reference signatures (binding differences may apply):

undo(self) -> None

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#undo

undoAvailable instance-attribute

undoAvailable: Any

Qt 5 reference:

undoAvailable : const bool

This property holds whether undo is available.

Undo becomes available once the user has modified the text in the line edit.

By default, this property is false.

Access functions:

bool isUndoAvailable() const

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#undoAvailable

validator

validator() -> Any

X.validator() -> PythonQt.QtGui.QValidator

Supplemental documentation: Qt 5 reference:

const QValidator *QLineEdit::validator() const

Returns a pointer to the current input validator, or nullptr if no validator has been set.

See also setValidator().

Upstream PySide2 reference signatures (binding differences may apply):

validator(self) -> PySide2.QtGui.QValidator

Source: https://doc.qt.io/archives/qt-5.15/qlineedit.html#validator

windowIconChanged

windowIconChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QLineEdit.windowIconChanged; argument details are not documented.

windowIconTextChanged

windowIconTextChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QLineEdit.windowIconTextChanged; argument details are not documented.

windowTitleChanged

windowTitleChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QLineEdit.windowTitleChanged; argument details are not documented.