PythonQt.QtGui.QPageLayout · declarations 001
Back to PythonQt.QtGui.QPageLayout
Cicero
instance-attribute
Cicero: Any
Didot
instance-attribute
Didot: Any
FullPageMode
instance-attribute
FullPageMode: Any
Inch
instance-attribute
Inch: Any
Landscape
instance-attribute
Landscape: Any
Millimeter
instance-attribute
Millimeter: Any
Pica
instance-attribute
Pica: Any
Point
instance-attribute
Point: Any
Portrait
instance-attribute
Portrait: Any
StandardMode
instance-attribute
StandardMode: Any
Unit
instance-attribute
Unit: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
fullRect
fullRect(units: Any) -> Any
X.fullRect(units) -> PythonQt.QtCore.QRectF
Supplemental documentation: Qt 5 reference:
QRectF QPageLayout::fullRect() const
Returns the full page rectangle in the current layout units.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See also paintRect() and units().
QRectF QPageLayout::fullRect(QPageLayout::Unit units) const
Returns the full page rectangle in the required units.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See also paintRect().
Upstream PySide2 reference signatures (binding differences may apply):
fullRect(self) -> PySide2.QtCore.QRectF
fullRect(self, units: PySide2.QtGui.QPageLayout.Unit) -> PySide2.QtCore.QRectF
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#fullRect
fullRectPixels
fullRectPixels(resolution: int) -> Any
X.fullRectPixels(resolution) -> PythonQt.QtCore.QRect
Supplemental documentation: Qt 5 reference:
QRect QPageLayout::fullRectPixels(int resolution) const
Returns the full page rectangle in device pixels for the given resolution.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See also paintRect().
Upstream PySide2 reference signatures (binding differences may apply):
fullRectPixels(self, resolution: int) -> PySide2.QtCore.QRect
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#fullRectPixels
fullRectPoints
fullRectPoints() -> Any
X.fullRectPoints() -> PythonQt.QtCore.QRect
Supplemental documentation: Qt 5 reference:
QRect QPageLayout::fullRectPoints() const
Returns the full page rectangle in Postscript Points (1/72 of an inch).
The page rectangle takes into account the page size and page orientation, but not the page margins.
See also paintRect().
Upstream PySide2 reference signatures (binding differences may apply):
fullRectPoints(self) -> PySide2.QtCore.QRect
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#fullRectPoints
isEquivalentTo
isEquivalentTo(other: Any) -> bool
X.isEquivalentTo(other) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::isEquivalentTo(const QPageLayout \&other) const
Returns true if this page layout is equivalent to the other page layout, i.e. if the
page has the same size, margins and orientation.
Upstream PySide2 reference signatures (binding differences may apply):
isEquivalentTo(self, other: PySide2.QtGui.QPageLayout) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#isEquivalentTo
isValid
isValid() -> bool
X.isValid() -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::isValid() const
Returns true if this page layout is valid.
Upstream PySide2 reference signatures (binding differences may apply):
isValid(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#isValid
margins
margins(units: Any) -> Any
X.margins(units) -> PythonQt.QtCore.QMarginsF
Supplemental documentation: Qt 5 reference:
QMarginsF QPageLayout::margins() const
Returns the margins of the page layout using the currently set units.
See also setMargins() and units().
QMarginsF QPageLayout::margins(QPageLayout::Unit units) const
Returns the margins of the page layout using the requested units.
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
margins(self) -> PySide2.QtCore.QMarginsF
margins(self, units: PySide2.QtGui.QPageLayout.Unit) -> PySide2.QtCore.QMarginsF
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#margins
marginsPixels
marginsPixels(resolution: int) -> Any
X.marginsPixels(resolution) -> PythonQt.QtGui.QMargins
Supplemental documentation: Qt 5 reference:
QMargins QPageLayout::marginsPixels(int resolution) const
Returns the margins of the page layout in device pixels for the given resolution.
See also setMargins().
Upstream PySide2 reference signatures (binding differences may apply):
marginsPixels(self, resolution: int) -> PySide2.QtCore.QMargins
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#marginsPixels
marginsPoints
marginsPoints() -> Any
X.marginsPoints() -> PythonQt.QtGui.QMargins
Supplemental documentation: Qt 5 reference:
QMargins QPageLayout::marginsPoints() const
Returns the margins of the page layout in Postscript Points (1/72 of an inch).
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
marginsPoints(self) -> PySide2.QtCore.QMargins
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#marginsPoints
maximumMargins
maximumMargins() -> Any
X.maximumMargins() -> PythonQt.QtCore.QMarginsF
Supplemental documentation: Qt 5 reference:
QMarginsF QPageLayout::maximumMargins() const
Returns the maximum margins that would be applied if the page layout was in StandardMode.
The maximum margins allowed are calculated as the full size of the page minus the minimum margins set. For example, if the page width is 100 points and the minimum right margin is 10 points, then the maximum left margin will be 90 points.
See also setMinimumMargins() and minimumMargins().
Upstream PySide2 reference signatures (binding differences may apply):
maximumMargins(self) -> PySide2.QtCore.QMarginsF
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#maximumMargins
minimumMargins
minimumMargins() -> Any
X.minimumMargins() -> PythonQt.QtCore.QMarginsF
Supplemental documentation: Qt 5 reference:
QMarginsF QPageLayout::minimumMargins() const
Returns the minimum margins of the page layout.
See also setMinimumMargins() and maximumMargins().
Upstream PySide2 reference signatures (binding differences may apply):
minimumMargins(self) -> PySide2.QtCore.QMarginsF
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#minimumMargins
mode
mode() -> Any
X.mode()
Supplemental documentation: Qt 5 reference:
QPageLayout::Mode QPageLayout::mode() const
Returns the page layout mode.
See also setMode().
Upstream PySide2 reference signatures (binding differences may apply):
mode(self) -> PySide2.QtGui.QPageLayout.Mode
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#mode
operator_assign
operator_assign(other: Any) -> Any
X.operator_assign(other) -> PythonQt.QtGui.QPageLayout
orientation
orientation() -> Any
X.orientation()
Supplemental documentation: Qt 5 reference:
QPageLayout::Orientation QPageLayout::orientation() const
Returns the page orientation of the page layout.
See also setOrientation().
Upstream PySide2 reference signatures (binding differences may apply):
orientation(self) -> PySide2.QtGui.QPageLayout.Orientation
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#orientation
pageSize
pageSize() -> Any
X.pageSize() -> PythonQt.QtGui.QPageSize
Supplemental documentation: Qt 5 reference:
QPageSize QPageLayout::pageSize() const
Returns the page size of the page layout.
Note that the QPageSize is always defined in a Portrait orientation. To obtain a size that takes the set orientation into account you must use fullRect().
See also setPageSize().
Upstream PySide2 reference signatures (binding differences may apply):
pageSize(self) -> PySide2.QtGui.QPageSize
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#pageSize
paintRect
paintRect(units: Any) -> Any
X.paintRect(units) -> PythonQt.QtCore.QRectF
Supplemental documentation: Qt 5 reference:
QRectF QPageLayout::paintRect() const
Returns the page rectangle in the current layout units.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
QRectF QPageLayout::paintRect(QPageLayout::Unit units) const
Returns the page rectangle in the required units.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
Upstream PySide2 reference signatures (binding differences may apply):
paintRect(self) -> PySide2.QtCore.QRectF
paintRect(self, units: PySide2.QtGui.QPageLayout.Unit) -> PySide2.QtCore.QRectF
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#paintRect
paintRectPixels
paintRectPixels(resolution: int) -> Any
X.paintRectPixels(resolution) -> PythonQt.QtCore.QRect
Supplemental documentation: Qt 5 reference:
QRect QPageLayout::paintRectPixels(int resolution) const
Returns the paintable rectangle in rounded device pixels for the given resolution.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
Upstream PySide2 reference signatures (binding differences may apply):
paintRectPixels(self, resolution: int) -> PySide2.QtCore.QRect
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#paintRectPixels
paintRectPoints
paintRectPoints() -> Any
X.paintRectPoints() -> PythonQt.QtCore.QRect
Supplemental documentation: Qt 5 reference:
QRect QPageLayout::paintRectPoints() const
Returns the paintable rectangle in rounded Postscript Points (1/72 of an inch).
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
Upstream PySide2 reference signatures (binding differences may apply):
paintRectPoints(self) -> PySide2.QtCore.QRect
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#paintRectPoints
setBottomMargin
setBottomMargin(bottomMargin: float) -> bool
X.setBottomMargin(bottomMargin) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::setBottomMargin(qreal bottomMargin)
Sets the bottom page margin of the page layout to bottomMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
setBottomMargin(self, bottomMargin: float) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setBottomMargin
setLeftMargin
setLeftMargin(leftMargin: float) -> bool
X.setLeftMargin(leftMargin) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::setLeftMargin(qreal leftMargin)
Sets the left page margin of the page layout to leftMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
setLeftMargin(self, leftMargin: float) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setLeftMargin
setMargins
setMargins(margins: Any) -> bool
X.setMargins(margins) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::setMargins(const QMarginsF \&margins)
Sets the page margins of the page layout to margins Returns true if the margins were successfully set.
The units used are those currently defined for the layout. To use different units then call setUnits() first.
If in the default StandardMode then all the new margins must fall between the minimum margins set and the maximum margins allowed by the page size, otherwise the margins will not be set.
If in FullPageMode then any margin values will be accepted.
See also margins() and units().
Upstream PySide2 reference signatures (binding differences may apply):
setMargins(self, margins: PySide2.QtCore.QMarginsF) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setMargins
setMinimumMargins
setMinimumMargins(minMargins: Any) -> None
X.setMinimumMargins(minMargins)
Supplemental documentation: Qt 5 reference:
void QPageLayout::setMinimumMargins(const QMarginsF \&minMargins)
Sets the minimum page margins of the page layout to minMargins.
It is not recommended to override the default values set for a page size as this may be the minimum printable area for a physical print device.
If the StandardMode mode is set then the existing margins will be clamped to the new minMargins and the maximum allowed by the page size. If the FullPageMode is set then the existing margins will be unchanged.
See also minimumMargins() and setMargins().
Upstream PySide2 reference signatures (binding differences may apply):
setMinimumMargins(self, minMargins: PySide2.QtCore.QMarginsF) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setMinimumMargins
setMode
setMode(mode: Any) -> None
X.setMode(mode)
Supplemental documentation: Qt 5 reference:
void QPageLayout::setMode(QPageLayout::Mode mode)
Sets a page layout mode to mode.
See also mode().
Upstream PySide2 reference signatures (binding differences may apply):
setMode(self, mode: PySide2.QtGui.QPageLayout.Mode) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setMode
setOrientation
setOrientation(orientation: Any) -> None
X.setOrientation(orientation)
Supplemental documentation: Qt 5 reference:
void QPageLayout::setOrientation(QPageLayout::Orientation orientation)
Sets the page orientation of the page layout to orientation.
Changing the orientation does not affect the current margins or the minimum margins.
See also orientation().
Upstream PySide2 reference signatures (binding differences may apply):
setOrientation(self, orientation: PySide2.QtGui.QPageLayout.Orientation) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setOrientation
setPageSize
setPageSize(pageSize: Any, minMargins: Any) -> None
X.setPageSize(pageSize, minMargins)
Supplemental documentation: Qt 5 reference:
void QPageLayout::setPageSize(const QPageSize \&pageSize, const QMarginsF \&minMargins \= QMarginsF(0, 0, 0, 0))
Sets the page size of the page layout to pageSize.
Optionally define the minimum allowed margins minMargins, e.g. the minimum margins able to be printed by a physical print device, otherwise the minimum margins will default to 0.
If StandardMode is set then the existing margins will be clamped to the new minimum margins and the maximum margins allowed by the page size. If FullPageMode is set then the existing margins will be unchanged.
See also pageSize().
Upstream PySide2 reference signatures (binding differences may apply):
setPageSize(self, pageSize: PySide2.QtGui.QPageSize, minMargins: PySide2.QtCore.QMarginsF=...) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setPageSize
setRightMargin
setRightMargin(rightMargin: float) -> bool
X.setRightMargin(rightMargin) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::setRightMargin(qreal rightMargin)
Sets the right page margin of the page layout to rightMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
setRightMargin(self, rightMargin: float) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setRightMargin
setTopMargin
setTopMargin(topMargin: float) -> bool
X.setTopMargin(topMargin) -> bool
Supplemental documentation: Qt 5 reference:
bool QPageLayout::setTopMargin(qreal topMargin)
Sets the top page margin of the page layout to topMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See also setMargins() and margins().
Upstream PySide2 reference signatures (binding differences may apply):
setTopMargin(self, topMargin: float) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setTopMargin
setUnits
setUnits(units: Any) -> None
X.setUnits(units)
Supplemental documentation: Qt 5 reference:
void QPageLayout::setUnits(QPageLayout::Unit units)
Sets the units used to define the page layout.
See also units().
Upstream PySide2 reference signatures (binding differences may apply):
setUnits(self, units: PySide2.QtGui.QPageLayout.Unit) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#setUnits
swap
swap(other: Any) -> None
X.swap(other)
Supplemental documentation: Qt 5 reference:
void QPageLayout::swap(QPageLayout \&other)
Swaps this page layout with other. This function is very fast and never fails.
Upstream PySide2 reference signatures (binding differences may apply):
swap(self, other: PySide2.QtGui.QPageLayout) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#swap
units
units() -> Any
X.units()
Supplemental documentation: Qt 5 reference:
QPageLayout::Unit QPageLayout::units() const
Returns the units the page layout is currently defined in.
See also setUnits().
Upstream PySide2 reference signatures (binding differences may apply):
units(self) -> PySide2.QtGui.QPageLayout.Unit
Source: https://doc.qt.io/archives/qt-5.15/qpagelayout.html#units