Skip to content

PythonQt.QtGui.QPaintEngine · declarations 002

Back to PythonQt.QtGui.QPaintEngine

PainterPaths instance-attribute

PainterPaths: Any

PatternBrush instance-attribute

PatternBrush: Any

PatternTransform instance-attribute

PatternTransform: Any

Pdf instance-attribute

Pdf: Any

PerspectiveTransform instance-attribute

PerspectiveTransform: Any

Picture instance-attribute

Picture: Any

PixmapTransform instance-attribute

PixmapTransform: Any

PolygonDrawMode instance-attribute

PolygonDrawMode: type

int([x]) -> integer int(x, base=10) -> integer

Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.

If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.

int('0b100', base=0) 4

PolylineMode instance-attribute

PolylineMode: Any

PorterDuff instance-attribute

PorterDuff: Any

PostScript instance-attribute

PostScript: Any

PrimitiveTransform instance-attribute

PrimitiveTransform: Any

QWindowSystem instance-attribute

QWindowSystem: Any

QuickDraw instance-attribute

QuickDraw: Any

RadialGradientFill instance-attribute

RadialGradientFill: Any

Raster instance-attribute

Raster: Any

RasterOpModes instance-attribute

RasterOpModes: Any

SVG instance-attribute

SVG: Any

WindingMode instance-attribute

WindingMode: Any

Windows instance-attribute

Windows: Any

X11 instance-attribute

X11: Any

begin

begin(pdev: Any) -> bool

X.begin(pdev) -> bool

Supplemental documentation: Qt 5 reference:

[pure virtual] bool QPaintEngine::begin(QPaintDevice *pdev)

Reimplement this function to initialise your paint engine when painting is to start on the paint device pdev. Return true if the initialization was successful; otherwise return false.

See also end() and isActive().

Upstream PySide2 reference signatures (binding differences may apply):

begin(self, pdev: PySide2.QtGui.QPaintDevice) -> bool

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#begin

clearDirty

clearDirty(df: Any) -> None

X.clearDirty(df)

Upstream PySide2 reference signatures (binding differences may apply):

clearDirty(self, df: PySide2.QtGui.QPaintEngine.DirtyFlags) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#clearDirty

coordinateOffset

coordinateOffset() -> Any

X.coordinateOffset() -> PythonQt.QtCore.QPoint

Upstream PySide2 reference signatures (binding differences may apply):

coordinateOffset(self) -> PySide2.QtCore.QPoint

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#coordinateOffset

drawEllipse

drawEllipse(r: Any) -> None

X.drawEllipse(r)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawEllipse(const QRectF \&rect)

Reimplement this function to draw the largest ellipse that can be contained within rectangle rect.

The default implementation calls drawPolygon().

[virtual] void QPaintEngine::drawEllipse(const QRect \&rect)

The default implementation of this function calls the floating point version of this function

Upstream PySide2 reference signatures (binding differences may apply):

drawEllipse(self, r: PySide2.QtCore.QRect) -> None
drawEllipse(self, r: PySide2.QtCore.QRectF) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawEllipse

drawImage

drawImage(r: Any, pm: Any, sr: Any, arg3: flags) -> None

X.drawImage(r, pm, sr, flags)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawImage(const QRectF \&rectangle, const QImage \&image, const QRectF \&sr, Qt::ImageConversionFlags flags \= Qt::AutoColor)

Reimplement this function to draw the part of the image specified by the sr rectangle in the given rectangle using the given conversion flags flags, to convert it to a pixmap.

Upstream PySide2 reference signatures (binding differences may apply):

drawImage(self, r: PySide2.QtCore.QRectF, pm: PySide2.QtGui.QImage, sr: PySide2.QtCore.QRectF, flags: PySide2.QtCore.Qt.ImageConversionFlags=...) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawImage

drawLines

drawLines(lines: Any, lineCount: int) -> None

X.drawLines(lines, lineCount)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawLines(const QLineF *lines, int lineCount)

The default implementation splits the list of lines in lines into lineCount separate calls to drawPath() or drawPolygon() depending on the feature set of the paint engine.

[virtual] void QPaintEngine::drawLines(const QLine *lines, int lineCount)

This is an overloaded function.

The default implementation converts the first lineCount lines in lines to a QLineF and calls the floating point version of this function.

Upstream PySide2 reference signatures (binding differences may apply):

drawLines(self, lines: PySide2.QtCore.QLine, lineCount: int) -> None
drawLines(self, lines: PySide2.QtCore.QLineF, lineCount: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawLines

drawPath

drawPath(path: Any) -> None

X.drawPath(path)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawPath(const QPainterPath \&path)

The default implementation ignores the path and does nothing.

Upstream PySide2 reference signatures (binding differences may apply):

drawPath(self, path: PySide2.QtGui.QPainterPath) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawPath

drawPixmap

drawPixmap(r: Any, pm: Any, sr: Any) -> None

X.drawPixmap(r, pm, sr)

Supplemental documentation: Qt 5 reference:

[pure virtual] void QPaintEngine::drawPixmap(const QRectF \&r, const QPixmap \&pm, const QRectF \&sr)

Reimplement this function to draw the part of the pm specified by the sr rectangle in the given r.

Upstream PySide2 reference signatures (binding differences may apply):

drawPixmap(self, r: PySide2.QtCore.QRectF, pm: PySide2.QtGui.QPixmap, sr: PySide2.QtCore.QRectF) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawPixmap

drawPoints

drawPoints(points: Any, pointCount: int) -> None

X.drawPoints(points, pointCount)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawPoints(const QPointF *points, int pointCount)

Draws the first pointCount points in the buffer points

[virtual] void QPaintEngine::drawPoints(const QPoint *points, int pointCount)

Draws the first pointCount points in the buffer points

The default implementation converts the first pointCount QPoints in points to QPointFs and calls the floating point version of drawPoints.

Upstream PySide2 reference signatures (binding differences may apply):

drawPoints(self, points: PySide2.QtCore.QPoint, pointCount: int) -> None
drawPoints(self, points: PySide2.QtCore.QPointF, pointCount: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawPoints

drawPolygon

drawPolygon(points: Any, pointCount: int, mode: Any) -> None

X.drawPolygon(points, pointCount, mode)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawPolygon(const QPointF *points, int pointCount, QPaintEngine::PolygonDrawMode mode)

Reimplement this virtual function to draw the polygon defined by the pointCount first points in points, using mode mode.

Note: At least one of the drawPolygon() functions must be reimplemented.

[virtual] void QPaintEngine::drawPolygon(const QPoint *points, int pointCount, QPaintEngine::PolygonDrawMode mode)

This is an overloaded function.

Reimplement this virtual function to draw the polygon defined by the pointCount first points in points, using mode mode.

Note: At least one of the drawPolygon() functions must be reimplemented.

Upstream PySide2 reference signatures (binding differences may apply):

drawPolygon(self, points: PySide2.QtCore.QPoint, pointCount: int, mode: PySide2.QtGui.QPaintEngine.PolygonDrawMode) -> None
drawPolygon(self, points: PySide2.QtCore.QPointF, pointCount: int, mode: PySide2.QtGui.QPaintEngine.PolygonDrawMode) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawPolygon

drawRects

drawRects(rects: Any, rectCount: int) -> None

X.drawRects(rects, rectCount)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawRects(const QRectF *rects, int rectCount)

Draws the first rectCount rectangles in the buffer rects. The default implementation of this function calls drawPath() or drawPolygon() depending on the feature set of the paint engine.

[virtual] void QPaintEngine::drawRects(const QRect *rects, int rectCount)

This is an overloaded function.

The default implementation converts the first rectCount rectangles in the buffer rects to a QRectF and calls the floating point version of this function.

Upstream PySide2 reference signatures (binding differences may apply):

drawRects(self, rects: PySide2.QtCore.QRect, rectCount: int) -> None
drawRects(self, rects: PySide2.QtCore.QRectF, rectCount: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawRects

drawTextItem

drawTextItem(p: Any, textItem: Any) -> None

X.drawTextItem(p, textItem)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawTextItem(const QPointF \&p, const QTextItem \&textItem)

This function draws the text item textItem at position p. The default implementation of this function converts the text to a QPainterPath and paints the resulting path.

Upstream PySide2 reference signatures (binding differences may apply):

drawTextItem(self, p: PySide2.QtCore.QPointF, textItem: PySide2.QtGui.QTextItem) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawTextItem

drawTiledPixmap

drawTiledPixmap(r: Any, pixmap: Any, s: Any) -> None

X.drawTiledPixmap(r, pixmap, s)

Supplemental documentation: Qt 5 reference:

[virtual] void QPaintEngine::drawTiledPixmap(const QRectF \&rect, const QPixmap \&pixmap, const QPointF \&p)

Reimplement this function to draw the pixmap in the given rect, starting at the given p. The pixmap will be drawn repeatedly until the rect is filled.

Upstream PySide2 reference signatures (binding differences may apply):

drawTiledPixmap(self, r: PySide2.QtCore.QRectF, pixmap: PySide2.QtGui.QPixmap, s: PySide2.QtCore.QPointF) -> None

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#drawTiledPixmap

end

end() -> bool

X.end() -> bool

Supplemental documentation: Qt 5 reference:

[pure virtual] bool QPaintEngine::end()

Reimplement this function to finish painting on the current paint device. Return true if painting was finished successfully; otherwise return false.

See also begin() and isActive().

Upstream PySide2 reference signatures (binding differences may apply):

end(self) -> bool

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#end

hasFeature

hasFeature(feature: Any) -> bool

X.hasFeature(feature) -> bool

Supplemental documentation: Qt 5 reference:

bool QPaintEngine::hasFeature(QPaintEngine::PaintEngineFeatures feature) const

Returns true if the paint engine supports the specified feature; otherwise returns false.

Upstream PySide2 reference signatures (binding differences may apply):

hasFeature(self, feature: PySide2.QtGui.QPaintEngine.PaintEngineFeatures) -> bool

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#hasFeature

isActive

isActive() -> bool

X.isActive() -> bool

Supplemental documentation: Qt 5 reference:

bool QPaintEngine::isActive() const

Returns true if the paint engine is actively drawing; otherwise returns false.

See also setActive().

Upstream PySide2 reference signatures (binding differences may apply):

isActive(self) -> bool

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#isActive

isExtended

isExtended() -> bool

X.isExtended() -> bool

Upstream PySide2 reference signatures (binding differences may apply):

isExtended(self) -> bool

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#isExtended

paintDevice

paintDevice() -> Any

X.paintDevice() -> PythonQt.QtGui.QPaintDevice

Supplemental documentation: Qt 5 reference:

QPaintDevice *QPaintEngine::paintDevice() const

Returns the device that this engine is painting on, if painting is active; otherwise returns nullptr.

Upstream PySide2 reference signatures (binding differences may apply):

paintDevice(self) -> PySide2.QtGui.QPaintDevice

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#paintDevice

painter

painter() -> Any

X.painter() -> PythonQt.QtGui.QPainter

Supplemental documentation: Qt 5 reference:

QPainter *QPaintEngine::painter() const

Returns the paint engine's painter.

Upstream PySide2 reference signatures (binding differences may apply):

painter(self) -> PySide2.QtGui.QPainter

Source: https://doc.qt.io/archives/qt-5.15/qpaintengine.html#painter