PythonQt.QtGui.QPainterPath · declarations 002
Back to PythonQt.QtGui.QPainterPath
subtracted
subtracted(r: Any) -> Any
X.subtracted(r) -> PythonQt.QtGui.QPainterPath
Supplemental documentation: Qt 5 reference:
QPainterPath QPainterPath::subtracted(const QPainterPath \&p) const
Returns a path which is p's fill area subtracted from this path's fill area.
Set operations on paths will treat the paths as areas. Non-closed paths will be treated as implicitly closed. Bezier curves may be flattened to line segments due to numerical instability of doing bezier curve intersections.
This function was introduced in Qt 4.3.
Upstream PySide2 reference signatures (binding differences may apply):
subtracted(self, r: PySide2.QtGui.QPainterPath) -> PySide2.QtGui.QPainterPath
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#subtracted
subtractedInverted
subtractedInverted(r: Any) -> Any
X.subtractedInverted(r) -> PythonQt.QtGui.QPainterPath
Upstream PySide2 reference signatures (binding differences may apply):
subtractedInverted(self, r: PySide2.QtGui.QPainterPath) -> PySide2.QtGui.QPainterPath
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#subtractedInverted
swap
swap(other: Any) -> None
X.swap(other)
Supplemental documentation: Qt 5 reference:
void QPainterPath::swap(QPainterPath \&other)
Swaps painter path other with this painter path. This operation is very fast and never fails.
This function was introduced in Qt 4.8.
Upstream PySide2 reference signatures (binding differences may apply):
swap(self, other: PySide2.QtGui.QPainterPath) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#swap
toFillPolygon
toFillPolygon(matrix: Any) -> Any
X.toFillPolygon(matrix) -> PythonQt.QtGui.QPolygonF
Supplemental documentation: Qt 5 reference:
QPolygonF QPainterPath::toFillPolygon(const QTransform \&matrix \= QTransform()) const
Converts the path into a polygon using the QTransform matrix, and returns the polygon.
The polygon is created by first converting all subpaths to polygons, then using a rewinding technique to make sure that overlapping subpaths can be filled using the correct fill rule.
Note that rewinding inserts addition lines in the polygon so the outline of the fill polygon does not match the outline of the path.
See also toSubpathPolygons(), toFillPolygons(), and QPainterPath Conversion.
Upstream PySide2 reference signatures (binding differences may apply):
toFillPolygon(self, matrix: PySide2.QtGui.QMatrix) -> PySide2.QtGui.QPolygonF
toFillPolygon(self, matrix: PySide2.QtGui.QTransform=...) -> PySide2.QtGui.QPolygonF
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#toFillPolygon
toFillPolygons
toFillPolygons(matrix: Any) -> tuple
X.toFillPolygons(matrix) -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPolygonF> QPainterPath::toFillPolygons(const QTransform \&matrix \= QTransform()) const
Converts the path into a list of polygons using the QTransform matrix, and returns the list.
The function differs from the toFillPolygon() function in that it creates several polygons. It is provided because it is usually faster to draw several small polygons than to draw one large polygon, even though the total number of points drawn is the same.
The toFillPolygons() function differs from the toSubpathPolygons() function in that it create only polygon for subpaths that have overlapping bounding rectangles.
Like the toFillPolygon() function, this function uses a rewinding technique to make sure that overlapping subpaths can be filled using the correct fill rule. Note that rewinding inserts addition lines in the polygons so the outline of the fill polygon does not match the outline of the path.
See also toSubpathPolygons(), toFillPolygon(), and QPainterPath Conversion.
Upstream PySide2 reference signatures (binding differences may apply):
toFillPolygons(self, matrix: PySide2.QtGui.QMatrix) -> typing.List[PySide2.QtGui.QPolygonF]
toFillPolygons(self, matrix: PySide2.QtGui.QTransform=...) -> typing.List[PySide2.QtGui.QPolygonF]
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#toFillPolygons
toReversed
toReversed() -> Any
X.toReversed() -> PythonQt.QtGui.QPainterPath
Supplemental documentation: Qt 5 reference:
QPainterPath QPainterPath::toReversed() const
Creates and returns a reversed copy of the path.
It is the order of the elements that is reversed: If a QPainterPath is composed by calling the moveTo(), lineTo() and cubicTo() functions in the specified order, the reversed copy is composed by calling cubicTo(), lineTo() and moveTo().
Upstream PySide2 reference signatures (binding differences may apply):
toReversed(self) -> PySide2.QtGui.QPainterPath
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#toReversed
toSubpathPolygons
toSubpathPolygons(matrix: Any) -> tuple
X.toSubpathPolygons(matrix) -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPolygonF> QPainterPath::toSubpathPolygons(const QTransform \&matrix \= QTransform()) const
Converts the path into a list of polygons using the QTransform matrix, and returns the list.
This function creates one polygon for each subpath regardless of intersecting subpaths (i.e. overlapping bounding rectangles). To make sure that such overlapping subpaths are filled correctly, use the toFillPolygons() function instead.
See also toFillPolygons(), toFillPolygon(), and QPainterPath Conversion.
Upstream PySide2 reference signatures (binding differences may apply):
toSubpathPolygons(self, matrix: PySide2.QtGui.QMatrix) -> typing.List[PySide2.QtGui.QPolygonF]
toSubpathPolygons(self, matrix: PySide2.QtGui.QTransform=...) -> typing.List[PySide2.QtGui.QPolygonF]
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#toSubpathPolygons
translate
translate(dx: Any, dy: Any) -> None
X.translate(dx, dy)
Supplemental documentation: Qt 5 reference:
void QPainterPath::translate(qreal dx, qreal dy)
Translates all elements in the path by (dx, dy).
This function was introduced in Qt 4.6.
See also translated().
void QPainterPath::translate(const QPointF \&offset)
This is an overloaded function.
Translates all elements in the path by the given offset.
This function was introduced in Qt 4.6.
See also translated().
Upstream PySide2 reference signatures (binding differences may apply):
translate(self, dx: float, dy: float) -> None
translate(self, offset: PySide2.QtCore.QPointF) -> None
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#translate
translated
translated(dx: Any, dy: Any) -> Any
X.translated(dx, dy) -> PythonQt.QtGui.QPainterPath
Supplemental documentation: Qt 5 reference:
QPainterPath QPainterPath::translated(qreal dx, qreal dy) const
Returns a copy of the path that is translated by (dx, dy).
This function was introduced in Qt 4.6.
See also translate().
QPainterPath QPainterPath::translated(const QPointF \&offset) const
This is an overloaded function.
Returns a copy of the path that is translated by the given offset.
This function was introduced in Qt 4.6.
See also translate().
Upstream PySide2 reference signatures (binding differences may apply):
translated(self, dx: float, dy: float) -> PySide2.QtGui.QPainterPath
translated(self, offset: PySide2.QtCore.QPointF) -> PySide2.QtGui.QPainterPath
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#translated
united
united(r: Any) -> Any
X.united(r) -> PythonQt.QtGui.QPainterPath
Supplemental documentation: Qt 5 reference:
QPainterPath QPainterPath::united(const QPainterPath \&p) const
Returns a path which is the union of this path's fill area and p's fill area.
Set operations on paths will treat the paths as areas. Non-closed paths will be treated as implicitly closed. Bezier curves may be flattened to line segments due to numerical instability of doing bezier curve intersections.
This function was introduced in Qt 4.3.
See also intersected() and subtracted().
Upstream PySide2 reference signatures (binding differences may apply):
united(self, r: PySide2.QtGui.QPainterPath) -> PySide2.QtGui.QPainterPath
Source: https://doc.qt.io/archives/qt-5.15/qpainterpath.html#united