PythonQt.QtGui.QPrinterInfo · declarations 001
Back to PythonQt.QtGui.QPrinterInfo
availablePrinterNames
availablePrinterNames() -> tuple
X.availablePrinterNames() -> tuple
Supplemental documentation: Qt 5 reference:
[static] QStringList QPrinterInfo::availablePrinterNames()
Returns a list of all the available Printer Names on this system.
It is recommended to use this instead of availablePrinters() as it will be faster on most systems.
Note that the list may become outdated if changes are made on the local system or remote print server. Only instantiate required QPrinterInfo instances when needed, and always check for validity before calling.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
availablePrinterNames() -> typing.List[str]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#availablePrinterNames
availablePrinters
availablePrinters() -> tuple
X.availablePrinters() -> tuple
Supplemental documentation: Qt 5 reference:
[static] QList\<QPrinterInfo> QPrinterInfo::availablePrinters()
Returns a list of QPrinterInfo objects for all the available printers on this system.
It is NOT recommended to use this as creating each printer instance may take a long time, especially if there are remote networked printers, and retained instances may become outdated if changes are made on the local system or remote print server. Use availablePrinterNames() instead and only instantiate printer instances as you need them.
Upstream PySide2 reference signatures (binding differences may apply):
availablePrinters() -> typing.List[PySide2.QtPrintSupport.QPrinterInfo]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#availablePrinters
defaultDuplexMode
defaultDuplexMode() -> Any
X.defaultDuplexMode()
Supplemental documentation: Qt 5 reference:
QPrinter::DuplexMode QPrinterInfo::defaultDuplexMode() const
Returns the default duplex mode of this printer.
This function was introduced in Qt 5.4.
Upstream PySide2 reference signatures (binding differences may apply):
defaultDuplexMode(self) -> PySide2.QtPrintSupport.QPrinter.DuplexMode
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#defaultDuplexMode
defaultPageSize
defaultPageSize() -> Any
X.defaultPageSize() -> PythonQt.QtGui.QPageSize
Supplemental documentation: Qt 5 reference:
QPageSize QPrinterInfo::defaultPageSize() const
Returns the current default Page Size for this printer.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
defaultPageSize(self) -> PySide2.QtGui.QPageSize
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#defaultPageSize
defaultPrinter
defaultPrinter() -> Any
X.defaultPrinter() -> PythonQt.QtGui.QPrinterInfo
Supplemental documentation: Qt 5 reference:
[static] QPrinterInfo QPrinterInfo::defaultPrinter()
Returns the default printer on the system.
The return value should be checked using isNull() before being used, in case there is no default printer.
On some systems it is possible for there to be available printers but none of them set to be the default printer.
See also isNull(), isDefault(), and availablePrinters().
Upstream PySide2 reference signatures (binding differences may apply):
defaultPrinter() -> PySide2.QtPrintSupport.QPrinterInfo
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#defaultPrinter
defaultPrinterName
defaultPrinterName() -> str
X.defaultPrinterName() -> str
Supplemental documentation: Qt 5 reference:
[static] QString QPrinterInfo::defaultPrinterName()
Returns the current default printer name.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
defaultPrinterName() -> str
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#defaultPrinterName
description
description() -> str
X.description() -> str
Supplemental documentation: Qt 5 reference:
QString QPrinterInfo::description() const
Returns the human-readable description of the printer.
This function was introduced in Qt 5.0.
See also QPrinterInfo::printerName().
Upstream PySide2 reference signatures (binding differences may apply):
description(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#description
isDefault
isDefault() -> bool
X.isDefault() -> bool
Supplemental documentation: Qt 5 reference:
bool QPrinterInfo::isDefault() const
Returns whether this printer is currently the default printer.
Upstream PySide2 reference signatures (binding differences may apply):
isDefault(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#isDefault
isNull
isNull() -> bool
X.isNull() -> bool
Supplemental documentation: Qt 5 reference:
bool QPrinterInfo::isNull() const
Returns whether this QPrinterInfo object holds a printer definition.
An empty QPrinterInfo object could result for example from calling defaultPrinter() when there are no printers on the system.
Upstream PySide2 reference signatures (binding differences may apply):
isNull(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#isNull
isRemote
isRemote() -> bool
X.isRemote() -> bool
Supplemental documentation: Qt 5 reference:
bool QPrinterInfo::isRemote() const
Returns whether this printer is a remote network printer.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
isRemote(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#isRemote
location
location() -> str
X.location() -> str
Supplemental documentation: Qt 5 reference:
QString QPrinterInfo::location() const
Returns the human-readable location of the printer.
This function was introduced in Qt 5.0.
Upstream PySide2 reference signatures (binding differences may apply):
location(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#location
makeAndModel
makeAndModel() -> str
X.makeAndModel() -> str
Supplemental documentation: Qt 5 reference:
QString QPrinterInfo::makeAndModel() const
Returns the human-readable make and model of the printer.
This function was introduced in Qt 5.0.
Upstream PySide2 reference signatures (binding differences may apply):
makeAndModel(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#makeAndModel
maximumPhysicalPageSize
maximumPhysicalPageSize() -> Any
X.maximumPhysicalPageSize() -> PythonQt.QtGui.QPageSize
Supplemental documentation: Qt 5 reference:
QPageSize QPrinterInfo::maximumPhysicalPageSize() const
Returns the maximum physical page size supported by this printer.
This function was introduced in Qt 5.3.
See also minimumPhysicalPageSize().
Upstream PySide2 reference signatures (binding differences may apply):
maximumPhysicalPageSize(self) -> PySide2.QtGui.QPageSize
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#maximumPhysicalPageSize
minimumPhysicalPageSize
minimumPhysicalPageSize() -> Any
X.minimumPhysicalPageSize() -> PythonQt.QtGui.QPageSize
Supplemental documentation: Qt 5 reference:
QPageSize QPrinterInfo::minimumPhysicalPageSize() const
Returns the minimum physical page size supported by this printer.
This function was introduced in Qt 5.3.
See also maximumPhysicalPageSize().
Upstream PySide2 reference signatures (binding differences may apply):
minimumPhysicalPageSize(self) -> PySide2.QtGui.QPageSize
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#minimumPhysicalPageSize
printerInfo
printerInfo(printerName: str) -> Any
X.printerInfo(printerName) -> PythonQt.QtGui.QPrinterInfo
Supplemental documentation: Qt 5 reference:
[static] QPrinterInfo QPrinterInfo::printerInfo(const QString \&printerName)
Returns the printer printerName.
The return value should be checked using isNull() before being used, in case the named printer does not exist.
This function was introduced in Qt 5.0.
See also isNull().
Upstream PySide2 reference signatures (binding differences may apply):
printerInfo(printerName: str) -> PySide2.QtPrintSupport.QPrinterInfo
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#printerInfo
printerName
printerName() -> str
X.printerName() -> str
Supplemental documentation: Qt 5 reference:
QString QPrinterInfo::printerName() const
Returns the name of the printer.
This is a unique id to identify the printer and may not be human-readable.
See also QPrinterInfo::description() and QPrinter::setPrinterName().
Upstream PySide2 reference signatures (binding differences may apply):
printerName(self) -> str
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#printerName
state
state() -> Any
X.state()
Supplemental documentation: Qt 5 reference:
QPrinter::PrinterState QPrinterInfo::state() const
Returns the current state of this printer.
This state may not always be accurate, depending on the platform, printer driver, or printer itself.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
state(self) -> PySide2.QtPrintSupport.QPrinter.PrinterState
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#state
supportedDuplexModes
supportedDuplexModes() -> tuple
X.supportedDuplexModes() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPrinter::DuplexMode> QPrinterInfo::supportedDuplexModes() const
Returns a list of duplex modes supported by this printer.
This function was introduced in Qt 5.4.
Upstream PySide2 reference signatures (binding differences may apply):
supportedDuplexModes(self) -> typing.List[PySide2.QtPrintSupport.QPrinter.DuplexMode]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportedDuplexModes
supportedPageSizes
supportedPageSizes() -> tuple
X.supportedPageSizes() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<QPageSize> QPrinterInfo::supportedPageSizes() const
Returns a list of Page Sizes supported by this printer.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
supportedPageSizes(self) -> typing.List[PySide2.QtGui.QPageSize]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportedPageSizes
supportedPaperSizes
supportedPaperSizes() -> tuple
X.supportedPaperSizes() -> tuple
Upstream PySide2 reference signatures (binding differences may apply):
supportedPaperSizes(self) -> typing.List[PySide2.QtGui.QPagedPaintDevice.PageSize]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportedPaperSizes
supportedResolutions
supportedResolutions() -> tuple
X.supportedResolutions() -> tuple
Supplemental documentation: Qt 5 reference:
QList\<int> QPrinterInfo::supportedResolutions() const
Returns a list of resolutions supported by this printer.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
supportedResolutions(self) -> typing.List[int]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportedResolutions
supportedSizesWithNames
supportedSizesWithNames() -> tuple
X.supportedSizesWithNames() -> tuple
Upstream PySide2 reference signatures (binding differences may apply):
supportedSizesWithNames(self) -> typing.List[typing.Tuple[str, PySide2.QtCore.QSizeF]]
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportedSizesWithNames
supportsCustomPageSizes
supportsCustomPageSizes() -> bool
X.supportsCustomPageSizes() -> bool
Supplemental documentation: Qt 5 reference:
bool QPrinterInfo::supportsCustomPageSizes() const
Returns whether this printer supports custom page sizes.
This function was introduced in Qt 5.3.
Upstream PySide2 reference signatures (binding differences may apply):
supportsCustomPageSizes(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qprinterinfo.html#supportsCustomPageSizes