Skip to content

PythonQt.QtGui.QTabWidget · declarations 002

Back to PythonQt.QtGui.QTabWidget

setMovable

setMovable(movable: bool) -> None

X.setMovable(movable)

Upstream PySide2 reference signatures (binding differences may apply):

setMovable(self, movable: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setMovable

setTabBar

setTabBar(arg__1: Any) -> None

X.setTabBar(arg__1)

Supplemental documentation: Qt 5 reference:

[protected] void QTabWidget::setTabBar(QTabBar *tb)

Replaces the dialog's QTabBar heading with the tab bar tb. Note that this must be called before any tabs have been added, or the behavior is undefined.

See also tabBar().

Upstream PySide2 reference signatures (binding differences may apply):

setTabBar(self, arg__1: PySide2.QtWidgets.QTabBar) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabBar

setTabBarAutoHide

setTabBarAutoHide(enabled: bool) -> None

X.setTabBarAutoHide(enabled)

Upstream PySide2 reference signatures (binding differences may apply):

setTabBarAutoHide(self, enabled: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabBarAutoHide

setTabEnabled

setTabEnabled(index: int, arg__2: Any) -> None

X.setTabEnabled(index, arg__2)

Supplemental documentation: Qt 5 reference:

void QTabWidget::setTabEnabled(int index, bool enable)

If enable is true, the page at position index is enabled; otherwise the page at position index is disabled. The page's tab is redrawn appropriately.

QTabWidget uses QWidget::setEnabled() internally, rather than keeping a separate flag.

Note that even a disabled tab/page may be visible. If the page is visible already, QTabWidget will not hide it; if all the pages are disabled, QTabWidget will show one of them.

See also isTabEnabled() and QWidget::setEnabled().

Upstream PySide2 reference signatures (binding differences may apply):

setTabEnabled(self, index: int, enabled: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabEnabled

setTabIcon

setTabIcon(index: int, icon: Any) -> None

X.setTabIcon(index, icon)

Supplemental documentation: Qt 5 reference:

void QTabWidget::setTabIcon(int index, const QIcon \&icon)

Sets the icon for the tab at position index.

See also tabIcon().

Upstream PySide2 reference signatures (binding differences may apply):

setTabIcon(self, index: int, icon: PySide2.QtGui.QIcon) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabIcon

setTabPosition

setTabPosition(arg__1: Any) -> None

X.setTabPosition(arg__1)

Upstream PySide2 reference signatures (binding differences may apply):

setTabPosition(self, position: PySide2.QtWidgets.QTabWidget.TabPosition) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabPosition

setTabShape

setTabShape(s: Any) -> None

X.setTabShape(s)

Upstream PySide2 reference signatures (binding differences may apply):

setTabShape(self, s: PySide2.QtWidgets.QTabWidget.TabShape) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabShape

setTabText

setTabText(index: int, arg__2: Any) -> None

X.setTabText(index, arg__2)

Supplemental documentation: Qt 5 reference:

void QTabWidget::setTabText(int index, const QString \&label)

Defines a new label for the page at position index's tab.

If the provided text contains an ampersand character ('\&'), a shortcut is automatically created for it. The character that follows the '\&' will be used as the shortcut key. Any previous shortcut will be overwritten, or cleared if no shortcut is defined by the text. See the QShortcut documentation for details (to display an actual ampersand, use '\&\&').

See also tabText().

Upstream PySide2 reference signatures (binding differences may apply):

setTabText(self, index: int, text: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabText

setTabToolTip

setTabToolTip(index: int, tip: str) -> None

X.setTabToolTip(index, tip)

Supplemental documentation: Qt 5 reference:

void QTabWidget::setTabToolTip(int index, const QString \&tip)

Sets the tab tool tip for the page at position index to tip.

See also tabToolTip().

Upstream PySide2 reference signatures (binding differences may apply):

setTabToolTip(self, index: int, tip: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabToolTip

setTabWhatsThis

setTabWhatsThis(index: int, text: str) -> None

X.setTabWhatsThis(index, text)

Supplemental documentation: Qt 5 reference:

void QTabWidget::setTabWhatsThis(int index, const QString \&text)

Sets the What's This help text for the page at position index to text.

This function was introduced in Qt 4.1.

See also tabWhatsThis().

Upstream PySide2 reference signatures (binding differences may apply):

setTabWhatsThis(self, index: int, text: str) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabWhatsThis

setTabsClosable

setTabsClosable(closeable: bool) -> None

X.setTabsClosable(closeable)

Upstream PySide2 reference signatures (binding differences may apply):

setTabsClosable(self, closeable: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setTabsClosable

setUsesScrollButtons

setUsesScrollButtons(useButtons: bool) -> None

X.setUsesScrollButtons(useButtons)

Upstream PySide2 reference signatures (binding differences may apply):

setUsesScrollButtons(self, useButtons: bool) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#setUsesScrollButtons

showEvent

showEvent(arg__1: Any) -> None

X.showEvent(arg__1)

Supplemental documentation: Qt 5 reference:

[override virtual protected] void QTabWidget::showEvent(QShowEvent *)

Reimplements: QWidget::showEvent(QShowEvent *event).

Upstream PySide2 reference signatures (binding differences may apply):

showEvent(self, arg__1: PySide2.QtGui.QShowEvent) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#showEvent

sizeHint instance-attribute

sizeHint: QSize

Qt 5 reference:

[override virtual] QSize QTabWidget::sizeHint() const

Reimplements an access function for property: QWidget::sizeHint.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#sizeHint

tabBar

tabBar() -> Any

X.tabBar() -> PythonQt.QtGui.QTabBar

Supplemental documentation: Qt 5 reference:

QTabBar *QTabWidget::tabBar() const

Returns the current QTabBar.

See also setTabBar().

Upstream PySide2 reference signatures (binding differences may apply):

tabBar(self) -> PySide2.QtWidgets.QTabBar

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabBar

tabBarAutoHide instance-attribute

tabBarAutoHide: bool

Qt 5 reference:

tabBarAutoHide : bool

If true, the tab bar is automatically hidden when it contains less than 2 tabs.

By default, this property is false.

This property was introduced in Qt 5.4.

Access functions:

bool tabBarAutoHide() const
void setTabBarAutoHide(bool enabled)

See also QWidget::visible.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabBarAutoHide

tabBarClicked

tabBarClicked(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.tabBarClicked; argument details are not documented.

Supplemental documentation: Qt 5 reference:

[signal] void QTabWidget::tabBarClicked(int index)

This signal is emitted when user clicks on a tab at an index.

index refers to the tab clicked, or -1 if no tab is under the cursor.

This function was introduced in Qt 5.2.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabBarClicked

tabBarDoubleClicked

tabBarDoubleClicked(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.tabBarDoubleClicked; argument details are not documented.

Supplemental documentation: Qt 5 reference:

[signal] void QTabWidget::tabBarDoubleClicked(int index)

This signal is emitted when the user double clicks on a tab at an index.

index is the index of a clicked tab, or -1 if no tab is under the cursor.

This function was introduced in Qt 5.2.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabBarDoubleClicked

tabCloseRequested

tabCloseRequested(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.tabCloseRequested; argument details are not documented.

Supplemental documentation: Qt 5 reference:

[signal] void QTabWidget::tabCloseRequested(int index)

This signal is emitted when the close button on a tab is clicked. The index is the index that should be removed.

This function was introduced in Qt 4.5.

See also setTabsClosable().

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabCloseRequested

tabIcon

tabIcon(index: int) -> Any

X.tabIcon(index) -> PythonQt.QtGui.QIcon

Supplemental documentation: Qt 5 reference:

QIcon QTabWidget::tabIcon(int index) const

Returns the icon for the tab on the page at position index.

See also setTabIcon().

Upstream PySide2 reference signatures (binding differences may apply):

tabIcon(self, index: int) -> PySide2.QtGui.QIcon

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabIcon

tabInserted

tabInserted(index: int) -> None

X.tabInserted(index)

Supplemental documentation: Qt 5 reference:

[virtual protected] void QTabWidget::tabInserted(int index)

This virtual handler is called after a new tab was added or inserted at position index.

See also tabRemoved().

Upstream PySide2 reference signatures (binding differences may apply):

tabInserted(self, index: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabInserted

tabPosition instance-attribute

tabPosition: Any

Qt 5 reference:

tabPosition : TabPosition

This property holds the position of the tabs in this tab widget

Possible values for this property are described by the TabPosition enum.

By default, this property is set to North.

Access functions:

QTabWidget::TabPosition tabPosition() const
void setTabPosition(QTabWidget::TabPosition position)

See also TabPosition.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabPosition

tabRemoved

tabRemoved(index: int) -> None

X.tabRemoved(index)

Supplemental documentation: Qt 5 reference:

[virtual protected] void QTabWidget::tabRemoved(int index)

This virtual handler is called after a tab was removed from position index.

See also tabInserted().

Upstream PySide2 reference signatures (binding differences may apply):

tabRemoved(self, index: int) -> None

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabRemoved

tabShape instance-attribute

tabShape: Any

Qt 5 reference:

tabShape : TabShape

This property holds the shape of the tabs in this tab widget

Possible values for this property are QTabWidget::Rounded (default) or QTabWidget::Triangular.

Access functions:

QTabWidget::TabShape tabShape() const
void setTabShape(QTabWidget::TabShape s)

See also TabShape.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabShape

tabText

tabText(index: int) -> str

X.tabText(index) -> str

Supplemental documentation: Qt 5 reference:

QString QTabWidget::tabText(int index) const

Returns the label text for the tab on the page at position index.

See also setTabText().

Upstream PySide2 reference signatures (binding differences may apply):

tabText(self, index: int) -> str

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabText

tabToolTip

tabToolTip(index: int) -> str

X.tabToolTip(index) -> str

Supplemental documentation: Qt 5 reference:

QString QTabWidget::tabToolTip(int index) const

Returns the tab tool tip for the page at position index or an empty string if no tool tip has been set.

See also setTabToolTip().

Upstream PySide2 reference signatures (binding differences may apply):

tabToolTip(self, index: int) -> str

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabToolTip

tabWhatsThis

tabWhatsThis(index: int) -> str

X.tabWhatsThis(index) -> str

Supplemental documentation: Qt 5 reference:

QString QTabWidget::tabWhatsThis(int index) const

Returns the What's This help text for the page at position index, or an empty string if no help text has been set.

This function was introduced in Qt 4.1.

See also setTabWhatsThis().

Upstream PySide2 reference signatures (binding differences may apply):

tabWhatsThis(self, index: int) -> str

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabWhatsThis

tabsClosable instance-attribute

tabsClosable: bool

Qt 5 reference:

tabsClosable : bool

This property holds whether close buttons are automatically added to each tab.

This property was introduced in Qt 4.5.

Access functions:

bool tabsClosable() const
void setTabsClosable(bool closeable)

See also QTabBar::tabsClosable().

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#tabsClosable

usesScrollButtons instance-attribute

usesScrollButtons: bool

Qt 5 reference:

usesScrollButtons : bool

This property holds whether or not a tab bar should use buttons to scroll tabs when it has many tabs.

When there are too many tabs in a tab bar for its size, the tab bar can either choose to expand its size or to add buttons that allow you to scroll through the tabs.

By default the value is style dependent.

This property was introduced in Qt 4.2.

Access functions:

bool usesScrollButtons() const
void setUsesScrollButtons(bool useButtons)

See also elideMode, QTabBar::usesScrollButtons, and QStyle::SH_TabBar_PreferNoArrows.

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#usesScrollButtons

widget

widget(index: int) -> Any

X.widget(index) -> PythonQt.QtGui.QWidget

Supplemental documentation: Qt 5 reference:

QWidget *QTabWidget::widget(int index) const

Returns the tab page at index position index or nullptr if the index is out of range.

Upstream PySide2 reference signatures (binding differences may apply):

widget(self, index: int) -> PySide2.QtWidgets.QWidget

Source: https://doc.qt.io/archives/qt-5.15/qtabwidget.html#widget

windowIconChanged

windowIconChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.windowIconChanged; argument details are not documented.

windowIconTextChanged

windowIconTextChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.windowIconTextChanged; argument details are not documented.

windowTitleChanged

windowTitleChanged(*args: Any, **kwargs: Any) -> Any

Native PythonQt.QtGui.QTabWidget.windowTitleChanged; argument details are not documented.