PythonQt.QtGui.QTextCursor · declarations 001
Back to PythonQt.QtGui.QTextCursor
BlockUnderCursor
instance-attribute
BlockUnderCursor: Any
Document
instance-attribute
Document: Any
EndOfBlock
instance-attribute
EndOfBlock: Any
EndOfLine
instance-attribute
EndOfLine: Any
EndOfWord
instance-attribute
EndOfWord: Any
KeepAnchor
instance-attribute
KeepAnchor: Any
LineUnderCursor
instance-attribute
LineUnderCursor: Any
MoveAnchor
instance-attribute
MoveAnchor: Any
MoveMode
instance-attribute
MoveMode: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
MoveOperation
instance-attribute
MoveOperation: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
NextBlock
instance-attribute
NextBlock: Any
NextCell
instance-attribute
NextCell: Any
NextCharacter
instance-attribute
NextCharacter: Any
NextRow
instance-attribute
NextRow: Any
NextWord
instance-attribute
NextWord: Any
NoMove
instance-attribute
NoMove: Any
PreviousBlock
instance-attribute
PreviousBlock: Any
PreviousCell
instance-attribute
PreviousCell: Any
PreviousCharacter
instance-attribute
PreviousCharacter: Any
PreviousRow
instance-attribute
PreviousRow: Any
PreviousWord
instance-attribute
PreviousWord: Any
SelectionType
instance-attribute
SelectionType: type
int([x]) -> integer int(x, base=10) -> integer
Convert a number or string to an integer, or return 0 if no arguments are given. If x is a number, return x.int(). For floating point numbers, this truncates towards zero.
If x is not a number or if base is given, then x must be a string, bytes, or bytearray instance representing an integer literal in the given base. The literal can be preceded by '+' or '-' and be surrounded by whitespace. The base defaults to 10. Valid bases are 0 and 2-36. Base 0 means to interpret the base from the string as an integer literal.
int('0b100', base=0) 4
Start
instance-attribute
Start: Any
StartOfBlock
instance-attribute
StartOfBlock: Any
StartOfLine
instance-attribute
StartOfLine: Any
StartOfWord
instance-attribute
StartOfWord: Any
WordLeft
instance-attribute
WordLeft: Any
WordRight
instance-attribute
WordRight: Any
WordUnderCursor
instance-attribute
WordUnderCursor: Any
anchor
anchor() -> int
X.anchor() -> int
Supplemental documentation: Qt 5 reference:
int QTextCursor::anchor() const
Returns the anchor position; this is the same as position() unless there is a selection in which case position() marks one end of the selection and anchor() marks the other end. Just like the cursor position, the anchor position is between characters.
See also position(), setPosition(), movePosition(), selectionStart(), and selectionEnd().
Upstream PySide2 reference signatures (binding differences may apply):
anchor(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#anchor
atBlockEnd
atBlockEnd() -> bool
X.atBlockEnd() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextCursor::atBlockEnd() const
Returns true if the cursor is at the end of a block; otherwise returns false.
See also atBlockStart() and atEnd().
Upstream PySide2 reference signatures (binding differences may apply):
atBlockEnd(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#atBlockEnd
atBlockStart
atBlockStart() -> bool
X.atBlockStart() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextCursor::atBlockStart() const
Returns true if the cursor is at the start of a block; otherwise returns false.
See also atBlockEnd() and atStart().
Upstream PySide2 reference signatures (binding differences may apply):
atBlockStart(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#atBlockStart
atEnd
atEnd() -> bool
X.atEnd() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextCursor::atEnd() const
Returns true if the cursor is at the end of the document; otherwise returns false.
This function was introduced in Qt 4.6.
See also atStart() and atBlockEnd().
Upstream PySide2 reference signatures (binding differences may apply):
atEnd(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#atEnd
atStart
atStart() -> bool
X.atStart() -> bool
Supplemental documentation: Qt 5 reference:
bool QTextCursor::atStart() const
Returns true if the cursor is at the start of the document; otherwise returns false.
See also atBlockStart() and atEnd().
Upstream PySide2 reference signatures (binding differences may apply):
atStart(self) -> bool
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#atStart
beginEditBlock
beginEditBlock() -> None
X.beginEditBlock()
Supplemental documentation: Qt 5 reference:
void QTextCursor::beginEditBlock()
Indicates the start of a block of editing operations on the document that should appear as a single operation from an undo/redo point of view.
For example:
QTextCursor cursor(textDocument);
cursor.beginEditBlock();
cursor.insertText("Hello");
cursor.insertText("World");
cursor.endEditBlock();
textDocument->undo();
The call to undo() will cause both insertions to be undone, causing both "World" and "Hello" to be removed.
It is possible to nest calls to beginEditBlock and endEditBlock. The top-most pair will determine the scope of the undo/redo operation.
See also endEditBlock().
Upstream PySide2 reference signatures (binding differences may apply):
beginEditBlock(self) -> None
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#beginEditBlock
block
block() -> Any
X.block() -> PythonQt.QtGui.QTextBlock
Supplemental documentation: Qt 5 reference:
QTextBlock QTextCursor::block() const
Returns the block that contains the cursor.
Upstream PySide2 reference signatures (binding differences may apply):
block(self) -> PySide2.QtGui.QTextBlock
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#block
blockCharFormat
blockCharFormat() -> Any
X.blockCharFormat() -> PythonQt.QtGui.QTextCharFormat
Supplemental documentation: Qt 5 reference:
QTextCharFormat QTextCursor::blockCharFormat() const
Returns the block character format of the block the cursor is in.
The block char format is the format used when inserting text at the beginning of an empty block.
See also setBlockCharFormat().
Upstream PySide2 reference signatures (binding differences may apply):
blockCharFormat(self) -> PySide2.QtGui.QTextCharFormat
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#blockCharFormat
blockFormat
blockFormat() -> Any
X.blockFormat() -> PythonQt.QtGui.QTextBlockFormat
Supplemental documentation: Qt 5 reference:
QTextBlockFormat QTextCursor::blockFormat() const
Returns the block format of the block the cursor is in.
See also setBlockFormat() and charFormat().
Upstream PySide2 reference signatures (binding differences may apply):
blockFormat(self) -> PySide2.QtGui.QTextBlockFormat
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#blockFormat
blockNumber
blockNumber() -> int
X.blockNumber() -> int
Supplemental documentation: Qt 5 reference:
int QTextCursor::blockNumber() const
Returns the number of the block the cursor is in, or 0 if the cursor is invalid.
Note that this function only makes sense in documents without complex objects such as tables or frames.
This function was introduced in Qt 4.2.
Upstream PySide2 reference signatures (binding differences may apply):
blockNumber(self) -> int
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#blockNumber
charFormat
charFormat() -> Any
X.charFormat() -> PythonQt.QtGui.QTextCharFormat
Supplemental documentation: Qt 5 reference:
QTextCharFormat QTextCursor::charFormat() const
Returns the format of the character immediately before the cursor position(). If the cursor is positioned at the beginning of a text block that is not empty then the format of the character immediately after the cursor is returned.
See also setCharFormat(), insertText(), and blockFormat().
Upstream PySide2 reference signatures (binding differences may apply):
charFormat(self) -> PySide2.QtGui.QTextCharFormat
Source: https://doc.qt.io/archives/qt-5.15/qtextcursor.html#charFormat